Cardo Systems PACKTALK PRO Manual page 25

5.3.4 Receiving phone calls during DMC conversations
The phone will ring simultaneously with the conversation, and you will be able to tell the group that you are
going to answer the call. Once you answer a call, the group will be muted (including the microphone).
5.3.5 MULTIPLE AUDIO SOURCES AND VOLUME MANAGEMENT
The PACKTALK PRO can use parallel audio streaming to stream audio from two connected sources simultaneously, so
that you can listen to your music or the FM radio while holding a DMC Intercom conversation. PACKTALK PRO
automatically manages your music and FM radio volume while using DMC Intercom. PACKTALK PRO also automatically
manages DMC Intercom volume with mobile phone calls and GPS. For more information on background audio level
and audio source priorities, see
You can receive a phone call during a DMC conversation. The phone will ring simultaneously with the DMC
conversation, and you will be able to inform the group that you are going to answer a call.
PACKTALK PRO also automatically manages DMC Intercom volume with Mobile phone calls.
DMC Intercom and GPS:
PACKTALK PRO automatically manages DMC Intercom volume with GPS.
5.4 BLUETOOTH INTERCOM
Your unit is equipped with Live-Intercom technology with automatic reconnection feature to ensure seamless
communication. When the unit detects disconnection from the other side, it will initiate automatic reconnection
attempts. An audible announcement of "Reconnecting" will signal the ongoing process, accompanied by
periodic beeps every 20 seconds for indication. Users have the flexibility to manually terminate the reconnection
attempts by tapping the intercom button once. The reconnection sequence is limited to 5 minutes, after which
the intercom will be disconnected if successful reconnection is not established. For enhanced efficiency, when
Supported units are connected to each other, reconnection is initiated from both sides, facilitating a faster
process. However, if a Supported unit is connected to any other Bluetooth device, reconnection attempts will
only be initiated from the Supported unit's side. This feature ensures a hassle-free and user-friendly experience,
maintaining continuous communication in diverse scenarios.
* Please note: the Bluetooth intercom requires manual initiation for the initial connection.
To connect your unit to another unit with a Bluetooth intercom, such as a Cardo Bluetooth unit or other Bluetooth
enabled devices, you must first pair their channels. Once paired, the unit automatically recognizes the other one
whenever they are in range.
Pairing a channel replaces any existing paired unit on that channel with the new unit.
●
The Intercom range with other models is limited to the distance of the unit with the shorter range.
5.4.1 SETTING UP NON-DMC INTERCOM
DMC is always the best way to connect a group of riders. If you happen to ride with a group of riders that do not have
DMC devices (such as Bluetooth communicators by Cardo or by other brands), you can switch your unit to Bluetooth
mode and create or join a non-DMC group. The participating riders are connected in a chain with a maximum total of
four riders.
To set up a non-DMC intercom (Cardo or non-Cardo) :
1. Confirm your Cardo unit is in Standby Bluetooth intercom mode (LED flashes blue slowly).
Using Parallel Audio Streaming on page 28.
25