Download Print this page

Advertisement

Quick Links

General hazard information:
• The screws for mounting the TV must not be too long, otherwise the TV could be
damaged inside.
• Please ensure that the cables are not damaged during installation. Damaged cables
must be replaced immediately to avoid short circuits.
• Screws must always be screwed in straight way. Please do not damage the threads
of the screws, otherwise the stability of the product cannot be guaranteed.
• Observe the weight limit of the respective TV mount as specified:
www.wissmann-raumobjekte.de
• TV mounts are not suitable as children's toys (damage to the product and risk of
injury can be the result of improper handling)
• Claims for damage or possible warranty claims due to incorrect installation or
incorrect handling cannot be made to the manufacturer.
• Products made of glass: observe the weight limit at
www.wissmann-raumobjekte.de.
Caution, glass is brittle and splinters if tilted. Always place on soft surfaces. Broken
or splintered glass is a risk of accidents and should therefore be disposed of
immediately.
• TV mounts with wheels: replace stiff wheels to avoid damage to soft wooden floors.
• TV mounts with a rotating function: To prevent damage to the cables due to
tension, insert them loosely so that the cables are not pulled too tightly when
the TV is rotated. To avoid chafing of the cables, use the spiral cover as cable
protection at the cable entry.
• TV mounts with a rotating function: If a rotation axis is stiff (TV can hardly be
rotated or cannot be rotated at all), please stop using the product and contact
the manufacturer immediately: info@wissmann-raumobjekte.de
• TV mounts for wall mounting: our dowels are not suitable for all types of walls.
Therefore, only use dowels suitable for your wall.
• TV mounts for wall mounting: If the wall holes were drilled too large, be sure to
use larger dowels or alternatively adhesive dowels.
TV mounts for wall mounting: The load-bearing capacity of the wall must be
ensured by the user (the upper screws of the wall bracket bear the weight of
the TV under tensile load)
Cable for model art115: to prevent heat build-up and fire hazards inside the
lower box, please use cables and plugs certified according to regulations.
Please do not store batteries, chargers or power supplies in the lower box.

Advertisement

loading
Need help?

Need help?

Do you have a question about the art115 and is the answer not in the manual?

Questions and answers

Summary of Contents for wissmann art115

  • Page 1 TV under tensile load)  Cable for model art115: to prevent heat build-up and fire hazards inside the lower box, please use cables and plugs certified according to regulations. Please do not store batteries, chargers or power supplies in the lower box.
  • Page 2 Flatscreen mount move “ art115”Assembly instructions Before starting the assembly please read these instructions and follow step by step. I.) TV-stand assembly 1) De-install the black lower block with casters out off the box 2) Install the plate to the box. The strut for cable what is mounted to the plate has to face in direction of the two holes of the box.
  • Page 3 3) Screw the plate to the box by using the nuts and washers. II.) Installation of the flat screen TV 1) Install the flat struts horizontally to the rear of your TV by using 4 of the 8 washers (the 4 headless screws of the struts have to show away from the TV). 2) In very rare cases, TV have a Vesa Norm of 600 mm.
  • Page 4 10) Raise the TV-holder in it´s stand position Note: If the installation of your TV is not possible even by using one of our accessory kits, please contact us by sending a photo of the TV´s backside: info@wissmann-raumobjekte.de We will find a solution immediately.

This manual is also suitable for:

Art115-sArt115-aArt115-w