Download Print this page

Advertisement

Quick Links

General hazard information:
• The screws for mounting the TV must not be too long, otherwise the TV could be
damaged inside.
• Please ensure that the cables are not damaged during installation. Damaged cables must
be replaced immediately to avoid short circuits.
• Screws must always be screwed in straight way. Please do not damage the threads of
the screws, otherwise the stability of the product cannot be guaranteed.
• Observe the weight limit of the respective TV mount as specified:
raumobjekte.de
• TV mounts are not suitable as children's toys (damage to the product and risk of injury
can be the result of improper handling)
• Claims for damage or possible warranty claims due to incorrect installation or incorrect
handling cannot be made to the manufacturer.
• Products made of glass: observe the weight limit at
www.wissmann-raumobjekte.de. Caution, glass is brittle and splinters if tilted. Always
place on soft surfaces. Broken or splintered glass is a risk of accidents and should
therefore be disposed of immediately.
• TV mounts with wheels: replace stiff wheels to avoid damage to soft wooden floors.
• TV mounts with a rotating function: To prevent damage to the cables due to
tension, insert them loosely so that the cables are not pulled too tightly when the
TV is rotated. To avoid chafing of the cables, use the spiral cover as cable
protection at the cable entry.
• TV mounts with a rotating function: If a rotation axis is stiff (TV can hardly be
rotated or cannot be rotated at all), please stop using the product and contact the
manufacturer immediately: info@wissmann-raumobjekte.de
• TV mounts for wall mounting: our dowels are not suitable for all types of walls.
Therefore, only use dowels suitable for your wall.
• TV mounts for wall mounting: If the wall holes were drilled too large, be sure to use
larger dowels or alternatively adhesive dowels.
• TV mounts for wall mounting: The load-bearing capacity of the wall must be
ensured by the user (the upper screws of the wall bracket bear the weight of the TV
under tensile load)
www.wissmann-

Advertisement

loading
Need help?

Need help?

Do you have a question about the art128 and is the answer not in the manual?

Questions and answers

Summary of Contents for wissmann art128

  • Page 1 • Products made of glass: observe the weight limit at www.wissmann-raumobjekte.de. Caution, glass is brittle and splinters if tilted. Always place on soft surfaces. Broken or splintered glass is a risk of accidents and should therefore be disposed of immediately.
  • Page 2: Wall Installation

    Installation instructions: TV-mount solution art128 Before starting the installation, please read these instructions and follow step by step. I.) Wall installation The vertical column can be placed either on the right or left-hand side of the TV. When mounting, please ensure the openings in the swivel arm face the wall.
  • Page 3 3) For fixing the product to concrete, solid brick or sand-lime brick walls, use a 10 mm drill bit to drill the holes in a depth of 80 mm into the wall and insert the 4 wall plugs provided. Note: The provided dowels and screws are for concrete, solid brick and sand-lime brick walls.
  • Page 4 Producer-information about dowels UX10 x 60: For more dowel information: www.fischersafety.com...
  • Page 5 4) Screw the wall bracket firmly into the wall plugs using the long screws included (6 x 60 mm). 5) Remove the vertical TV installing plate from the end of the extension arm. For this, loosen the two screws (red arrow). Fig.
  • Page 6 II.) Installing the TV to the mount 1) Fit the flat profiles (29,5”long) horizontal to the rear of your flatscreen by using 4 of the 8 washers (the 4 headless screws of the profil have to show away from the TV). Note: The assembly of the flat horizontal profiles has to be done by using the screws provided with your television.
  • Page 7 Final information:  The solution art128 is produced in fine brushed stainless steel. This material is very sensitive for fingerprints. We did a special surface protection and recommend to renew that every few months to avoid those spots of fingerprints (bottle of Chromol, to renew the...

This manual is also suitable for:

Art128-1