Download Print this page

wissmann Ecoline art900 Series Manual

Tv stand

Advertisement

Quick Links

General hazard information:
• The screws for mounting the TV must not be too long, otherwise the TV could be
damaged inside.
• Please ensure that the cables are not damaged during installation. Damaged cables
must be replaced immediately to avoid short circuits.
• Screws must always be screwed in straight way. Please do not damage the threads
of the screws, otherwise the stability of the product cannot be guaranteed.
• Observe the weight limit of the respective TV mount as specified:
www.wissmann-raumobjekte.de
• TV mounts are not suitable as children's toys (damage to the product and risk of
injury can be the result of improper handling)
• Claims for damage or possible warranty claims due to incorrect installation or
incorrect handling cannot be made to the manufacturer.
• Products made of glass: observe the weight limit at
www.wissmann-raumobjekte.de.
Caution, glass is brittle and splinters if tilted. Always place on soft surfaces. Broken
or splintered glass is a risk of accidents and should therefore be disposed of
immediately.
• TV mounts with wheels: replace stiff wheels to avoid damage to soft wooden floors.
• TV mounts with a rotating function: To prevent damage to the cables due to
tension, insert them loosely so that the cables are not pulled too tightly when
the TV is rotated. To avoid chafing of the cables, use the spiral cover as cable
protection at the cable entry.
• TV mounts with a rotating function: If a rotation axis is stiff (TV can hardly be
rotated or cannot be rotated at all), please stop using the product and contact
the manufacturer immediately: info@wissmann-raumobjekte.de
• TV mounts for wall mounting: our dowels are not suitable for all types of walls.
Therefore, only use dowels suitable for your wall.
• TV mounts for wall mounting: If the wall holes were drilled too large, be sure to
use larger dowels or alternatively adhesive dowels.
• TV mounts for wall mounting: The load-bearing capacity of the wall must be
ensured by the user (the upper screws of the wall bracket bear the weight of
the TV under tensile load)
P H O N E : 0 2 1 3 1 / 4 0 2 8 2 8 1 F A X : 0 2 1 3 1 / 4 0 2 8 2 8 4
R U R S T R . 6 – 4 1 5 6 4 K A A R S T – G E R M A N Y

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ecoline art900 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for wissmann Ecoline art900 Series

  • Page 1 • TV mounts with a rotating function: If a rotation axis is stiff (TV can hardly be rotated or cannot be rotated at all), please stop using the product and contact the manufacturer immediately: info@wissmann-raumobjekte.de • TV mounts for wall mounting: our dowels are not suitable for all types of walls.
  • Page 2 Installation instruction: TV-stand art900 assembly of the stand 1. The underside of the base plate has 2 countersunk holes for the screw heads 2. Place the vertical column (opening at the bottom back) on the base plate and mount it from below with the countersunk screws Installation of the TV (without rotation function) 1) Install the flat struts horizontally to the rear of your TV by using 4 of the 8 washers (the 4 headless screws of the struts have to show away from the TV).
  • Page 3 3) Screw the black vertical strut (photo below) to the column Note: the black 10 mm spacers must be inserted between the brace and the column. 4) The 4 screws of the horizontal struts at the rear of the TV have now to be inserted into the vertical strut (two people should hold the TV).
  • Page 4 7) Mount the support ring (red arrow) on the column at the desired height (the nose on the support ring points upwards) 8) Note: if the support ring is pre-assembled, it is not tightened. Please set the desired height and tighten the screws on the support ring. 9) Attach the TV with the two flat profiles: To do this, guide the rotating sleeves over the column 10) Now tighten the screws on the horizontal flat profiles at the back of the TV...
  • Page 5 Note: If the installation of your TV is not possible even by using one of our accessory kits, please contact us by sending a photo of the TV´s backside: info@wissmann-raumobjekte.de We will find a solution immediately. Final information: This TV mount is produced in finely brushed stainless steel. Stainless steel surfaces are sensitive for fingerprints.

This manual is also suitable for:

Ecoline art900-103-ci