Aiwa HV-FX8100U Operating Instructions Manual page 13

To connect a CATV system using a CATV converter and 2-way splitter
CATV system
1
2-way splitter
(not supplied)
75-ohm coaxial cable
(not supplied)
6
2
75-ohm coaxial cable (not supplied)
1
Connect the cable from the CATV system to the 2-way splitter.
2
Connect one of the output connector of the splitter to the input
connector of the CATV converter, and the other to the A/B switch.
3
Connect the output connectors on the converter to the UHF/VHF IN
(ANT) connector on this VCR.
4
Connect the UHF/VHF OUT (TV) connector on this VCR to the A/B
switch using the supplied antenna cable.
5
Connect the A/B switch to the antenna connector on your TV.
6
Connect the AC cord to the AC outlet.
CATV converter
IN
2
To AC outlet
AC cord
TV
OUT
75-ohm coaxial cable (not supplied)
UHF/VHF
IN (ANT)
OUT (TV)
To antenna connector
5
75-ohm coaxial cable (not supplied)
3
4
Antenna cable
(supplied)
A/B switch
(not supplied)
Note
When you use a CATV converter,
refer to the operating Instructions
of it.
CONTINUE
ENGLISH
6