Aiwa HV-FX8100U Operating Instructions Manual page 12

Connecting the VCR (continued)
CATV connections
To connect the CATV system without using a CATV converter
3
To AC outlet
AC cord
1
Connect the cable from the CATV system to the UHF/VHF IN (ANT)
connector on this VCR.
2
Connect the supplied antenna cable to the UHF/VHF OUT (TV) connector on
the VCR and the antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
3
Connect the AC cord to the AC outlet.
To connect a CATV system using a CATV converter
4
To AC outlet
AC cord
1
Connect the cable from the CATV system to the input connector on the CATV converter.
2
Connect the output connector on the converter to the UHF/VHF IN (ANT) connector on this VCR.
3
Connect the supplied antenna cable to the UHF/VHF OUT (TV) connector on the VCR and the
antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
4
Connect the AC cord to the AC outlet.
5
ENGLISH
CATV system
75-ohm coaxial cable
(not supplied)
1
UHF/VHF
IN (ANT)
2
OUT (TV)
Antenna cable
(supplied)
TV
To antenna connector
CATV system
75-ohm
coaxial cable
(not supplied)
UHF/VHF
75-ohm coaxial cable (not supplied)
IN (ANT)
3
OUT (TV)
Antenna cable
(supplied)
TV
To antenna connector
Antenna splitter (not supplied)
UHF
300-ohm
To VHF antenna
terminal
To UHF antenna terminal
CATV converter
(not supplied)
IN OUT
1
Antenna splitter
(not supplied)
UHF
TV
VHF
2
TV
VHF
300-ohm