Voice Mail Setting; Broadcast Settings - NEC 515 Manual

Voice Mail Setting

To establish the settings for voice mail (See Flag.):
*
Press Softkey 2 (Message) or Softkey 1 (Main) and 2 to display the Message center folder screen.
Press (Options Menu) and 7 to display the Voice mail number screen.
MENU
Input the number to access voice mail and press Softkey 1 (OK) to save the voice mail setting or changes.
The PIN/password may be input with the voice mail number. Input a "P" (pause) before the PIN/password. Press and HOLD at least two
seconds the # key to input a pause, "P." For a voice mail number with a PIN/password, input: voicemail number, P, and PIN/password.
When adding a password ending with "#" symbol, the final character cannot be "#." It should be a "P." Input the voice mail number
with a PIN/password number ending with "#" symbol as: voice mail number, P, PIN/password number, #, and P.
The international dialing "+" symbol may also be input, if needed. Press and HOLD at least two seconds the 0 key to input the "+"
symbol. For international traveling, input: +, international code, voice mail number, P, PIN/password number, #, and P.

Broadcast Settings

To establish Broadcast settings from the Message center folder screen (See Flag.):
*
Press Softkey 2 (Message) or Softkey 1 (Main) and 2 to display the Message center folder screen.
Press (Options Menu), 8, and 2 to display the Auto display screen.
MENU
Highlight On for broadcast messages to display automatically on the Idle screen or highlight Off so that no broadcast messages
display automatically and press
Press Softkey 1 (OK) to save the broadcast setting or changes and return to the Broadcast menu.
To establish the filters for broadcast settings from the Message center folder screen:
*
Press Softkey 2 (Message) or Softkey 1 (Main) and 2 to display the Message center folder screen.
Press (Options Menu) , 8, and 3 to display the Filter screen.
MENU
Highlight the type of filter (All to filter all broadcast messages, None for no filters, or List to filter for specific broadcast
messages) and press (Select) to select the radio button.
If List is selected, a screen displays to enter a 3-digit code for the type of broadcast message to filter. Up to 5 codes may be
filtered.
Press Softkey 1 (OK) to save the filter setting or changes and return to the Broadcast menu.
To establish the language to receive broadcast messages from the Message center folder:
*
Press Softkey 2 (Message) or Softkey 1 (Main) and 2 to display the Message center folder screen.
Press (Options Menu), 8, and 4 to display the Language screen.
MENU
Highlight the preferred language, press
language setting or change.
(Select) to select the radio button.
(Select) to place a checkmark in the box, and press Softkey 1 (OK) to save the
O
Voice Mail is SIM and network
provider dependent. Contact your
Service Provider for details of your
voice mail number, and any other
associated options.
O
Broadcast messages are from the
network provider.
O
If Authentication is turned On in the
Email settings, the Authentication
screen displays for you to input your
user identification and password. An
"*" displays for each character
entered in the Password field.
62