SMC Networks WUSBS-N2 User Manual page 41

To use the WPA function, take the following steps:
1. Select Security Type, WPA-PSK/WPA2-PSK from the
drop-down menu.
2. Type in the WPA Passphrase (Pre-Shared Key: PSK).
3. Select ASCII or Hex in the Key Type field
4. Click Apply Change to allow the settings to take effect.
Note: The WPA Passphrase character limit needs to be between
8-63 characters.
Manual Pre-Shared Key supports up to 64-Hex characters. If
there is no authentication server on your SOHO network, you can
issue the Pre-Shared Key to the adapter that is connected to the
access point. Be sure to use the same key for the wireless access
point and the connected adapter.
Configuration
23