Table of Contents
Advertisement
Network Connection Problems
If the Link LED on the SMCWUSB-G adapter does not light, or if
you cannot access any network resources from your computer,
check the following:
•
Make sure the correct software driver is installed for your
operating system. If necessary, try reinstalling the driver.
•
Make sure the computer and other network devices are
receiving power.
•
The access point you want to connect to may be defective. Try
using another access point.
•
Make sure the SSID and security settings of the adapter are
set to the same as the access point to which you are
connecting.
If your wireless station cannot communicate with a computer in
the Ethernet LAN when configured for Infrastructure mode, check
the following:
•
Make sure the access point that the station is associated with
is powered on.
•
If the connection still fails, change the access point and all the
clients within the BSS to another radio channel.
•
For a station with roaming disabled, make sure the SSID is the
same as that used by the access point, or the same as that
used by the access points in the extended service set (ESS).
Network Connection Problems
35
Advertisement
Table of Contents
