Related Manuals for Panasonic EFC-SPLC-02M
Summary of Contents for Panasonic EFC-SPLC-02M
- Page 1 10.7MHz Communication Device User Manual （EFC-SPLC-02M） R&D Center Electromechanical Control Business Division Automotive & Industrial Systems Company Panasonic Corporation © Panasonic Corporation...
- Page 2 - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. © Panasonic Corporation...
- Page 3 You can get the ID and other data by using external equipment(PC/Tablet). The “Master” can communicate the external equipment(PC/Tablet) via the Serial Communication. The ID of the connected the “Slave” will be output on the terminal software (Teraterm etc.). Serial 10.7Mz Tablet /BLE Slave Master Fig.1 © Panasonic Corporation...
- Page 4 When the “Slave” receives the ID request from the “Master”, The ”Slave” will reply its own ID. Both devices communicate using the frequency of 10.7 MHz. Master Slave Power ON ID Request ID Request Power ON ID Request ID Reply ID Request ID Reply ID Request ID Reply Fig.2 © Panasonic Corporation...
- Page 5 ■ Communication I/F in External Equipment Serial port settings : Speed :115200 [bps] Data bits [bits] Stop bits [bit] Parity :None Flow control :None Setting example (Teraterm): Fig.3 © Panasonic Corporation...
- Page 6 ■ Communication I/F in External Equipment Command execution examples : ⇒ID information, etc. 図５ © Panasonic Corporation...
- Page 7 ■ Disclaimer Please note that the information or the program it in this document may be changed or updated without notice. For any damages caused by these changes and updates, we are not responsible. © Panasonic Corporation...
Need help?
Do you have a question about the EFC-SPLC-02M and is the answer not in the manual?
Questions and answers