SMC Networks WCB-G - annexe 1 Quick Installation Manual page 2

g g
EZConnect™ EZConnect™
WLAN Cardbus Adapter WLAN Cardbus Adapter
Quick Installation Guide Quick Installation Guide Quick Installation Guide
g
EZConnect™
WLAN Cardbus Adapter
Quick Installation Guide
SMCWCB-G SMCWCB-G SMCWCB-G
6. Select "Yes, this time only"
7. Select the "Install the software automatically" option and click [Next].
(Note: In Windows 2000 or Windows XP, you may be prompted by a Digital
Signature pop up window. Please be sure to click "Yes" or Continue Anyway"
to continue the driver installation.)
Hardware Installation Hardware Installation Hardware Installation
Warning: Network cards are sensitive to static electricity. To protect the card, avoid
touching its electrical components and always touch the metal chassis of your com-
puter before handling the card
1. Find an available type II or type III Cardbus slot in your laptop.
2. With the Adapter's 68-pin connector facing the Cardbus slot, and the "EZ
Connect™ g" label facing up, slide the card completely into the slot as shown
below.
SMCWCB-G
Note: The SMCWCB-G Wireless Cardbus Adapter allows you to "hot swap" the card
any time, even when your notebook is powered on.
Using the EZ Installation Wizard
3. For Windows 98SE/Me/2000, Cardbus specification is required. Please check the
documents for your Cardbus adapter driver before installing the driver and utility
software for the SMCWCB-G.
8. Click [Finish] when complete.
9. Click [Finish] again and PC will restart.
Package Contents
Explorer Explorer Explorer
System Requirements
Netscape Netscape
Disable HTTP Proxy
Configuring your Macintosh Configuring your Macintosh
Configure TCP/IP Settings Configure TCP/IP Settings
Configure the Barricade g Configure the Barricade g
Using the EZ Installation Wizard Using the EZ Installation Wizard Using the EZ Installation Wizard
NOTE: Installation processes such as this may require the use of your original,
licensed copy of Windows. Please have your Windows CD available BEFORE proceed-
Explorer Explorer Explorer
ing with the installation.
Netscape Netscape
This Installation method makes the process as simple and Plug-and-Play as possible.
Hardware Description
Disable HTTP Proxy
Simply run the driver/utility program and insert your EZ Connect™ g WLAN Cardbus
adapter. It's as easy as 1-2-3.
Configuring your Macintosh Configuring your Macintosh
1. Insert the EZ Installation Wizard and Documentation CD.
Applications
Configure TCP/IP Settings Configure TCP/IP Settings
2. Click the [Install Driver/Utility] button to continue.
3. Please wait while the utility detects your system environment. Configure the Barricade g Configure the Barricade g
4. The installation program will proceed to copy the necessary files
to your hard drive.
5. When prompted, please insert your SMCWCB-G Wireless Cardbus Adapter. The
Found New Hardware window will appear.
2
Remote
1
From U.S.A. and Canada http://www.smc.com/
(24 hours a day, 7 days a week)
If you are looking for further contact
(800) SMC-4-YOU; Phn: (949) 679-8000;
information, please visit www.smc.com
Fax: (949) 679-1481
From Europe : Contact details can be found
on www.smc.com
38 Tesla
INTERNET
Irvine, CA 92618
E-mail addresses:
Phone: (949) 679-8000
techsupport@smc.com
Driver updates:
Model Number: SMCWCB-G
http://www.smc.com/index.cfm?action=tech
support drivers downloads
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or
other rights of third parties, which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifica-
tions at any time without notice.
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
Copyright © SMC Networks, Inc., 2004. All rights reserved.
SMC is a registered trademark; EZ Connect and Barricade are trademarks of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their respective
holders.
Sys
Get Connected
3
Unpack