Solight V32 Manual

EN V32
Multimeter
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and instructions before
installing, using or repairing the equipment. This will ensure not only the protection of persons, but also the long life of the equipment.
Home
This multimeter has been designed as a stable, reliable, comprehensive digital electronic measuring instrument with a compact size
and features an LCD display with 31.5mm font height for clearer readings. And with an excellent precision A/D converter as the core
for the extensive integrated circuit, which ensures that this m odel measures AC/DC voltage, AC/DC current, resistance, diode test,
continuity, NCV, live wire and battery test. With built-in backlight and flashlight for taking readings in dark environments. To make
full use of this meter, keep this instruction manual carefully.
Description of the device
1. Induction position NCV
2. LCD Display: Font height 31.5mm
3. NCV indicator
4. Three control buttons
- SEL: function shift button
-
-
on/off.
5. Rotary function switch
6. Input connectors
Safety notice
This device has been designed in accordance with IEC1010 standard for electronic measuring instruments with 600 V CAT III voltage
and pollution level 2.
This symbol indicates that the operator must follow the explanation in the operating instructions to avoid injury or damage to
the measuring instrument.
Grounding High Voltage
Notice
- Improper use of this meter may cause damage, electric shock, injury or death. Read and understand this manual before using
the equipment.
- Always disconnect the cables before changing the battery or fuses.
- Before using the meter, check the condition of the cables and the meter itself for damage.
- Use extra caution when making measurements if the voltage is higher than 30 VAC RMS or 60 V DC, these voltages are
considered an electrical shock hazard.
- Always discharge the capacitors and disconnect the device under test from the power supply before performing diode,
resistance or continuity tests.
- To avoid damage to the measuring instrument, do not exceed the maximum input limits specified in the specification.
- If the device will not be used for a long period of time, remove the batteries to prevent them from running down.
- To prevent electric shock, disconnect the test leads from the voltage source before removing the back cover or battery cover
or fuses.
- To prevent electric shock, do not use the meter until the battery and fuse covers are in place and securely fastened.
- To protect the circuit, replace the fuse, it must be in the same specification.
- Do not clean the housing of the device with a chemical solvent.
: luminaire
: Short press to permanently display the measured data. Long press to switch the display backlight
Double Insulation