Advertisement
Quick Links
V31
E N
Multimeter
Thank you for purchasing our equipment. Please read this manual
carefully and heed the safety warnings and instructions before
installing, using or repairing the equipment. This will ensure not
only the protection of persons, but also the long life of the
equipment. This meter ensures safe operation in a CAT III 600 V
environment.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Solight V31
Summary of Contents for Solight V31
- Page 1 Multimeter Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but also the long life of the equipment.
- Page 2 1. SA F E T Y N O T ICE The product meets IEC 61010 safety standard and CAT III 600V, RoHS, pollution degree 2 and double insulation standards. - Do not use the device or its components if they are damaged. Pay particular attention to the insulation.
- Page 3 2 . D es crip tio n o f sym b o ls Double insulation Grounding DC (direct current) DC or AC Automatic range Non-contact voltage test Electromagnetic field symbol AC (alternating current) Low battery voltage symbol Automatic shutdown °C / °F Celsius and Fahrenheit units Electric torch 3.
-
Page 4: Technical Parameters
T EC H N IC A L P AR A M ET ER S Accuracy guaranteed for 1 year 23±5°C, ≤80%RH 4 . D C vo lta ge (a uto m a tic ra n ge) Range Resolution Accuracy 600mV 0.1mV ±(0.8% of rdg + 5dgts) 10mV... - Page 5 4 .3 R esis ta n ce (a uto m a tic ra n ge) Range Resolution Accuracy 60Ω 0.01Ω 600Ω 0.1Ω 6KΩ 1Ω ±(1.5% of rdg + 5dgts) 60KΩ 10Ω 600KΩ 100Ω 6MΩ 1KΩ 60MΩ 10KΩ No-load voltage: approx. 0.25 V Overload protection: 250V DC/AC rms 4 .4 F req u en cy (a u to m a tic ra n ge) Range...
- Page 6 4 .6 A C cu rren t (a u to m atic ra n ge) Range Resolution Accuracy 600µA 0.1µA ±(1.5% of rdg + 10dgts) 6000µA 1µA 60mA 10µA 600mA 100µA ±(3.0% of rdg + 10dgts) 10mA Measurement voltage drop: 200 mV Frequency range: 40 to 400 Hz Response: True-RMS 4 .7 T em p era tu re...
- Page 7 5 ) Sp ecifica tio n s Maximum voltage between input terminal and ground: 600 10A clamp: fuse 10A 600V Quick Fuse Φ5x20mm Vrms Φ5x20mmMaximum display 5999, display above the range Input terminal: 500mA 600V fuse Quick fuse shown as "OL", update rate: 2~3 times/second Backlight: manual on/off or automatic switch off after 30 seconds.
- Page 8 7) O p era tio n s If the low battery symbol " " is displayed, replace the battery to prevent erroneous data from being displayed. Also pay special attention to the warning sign next to the test lead socket, which warns that the voltage or current tested must not exceed the values indicated on the instrument.
- Page 9 - When measuring low resistance, the test leads will produce a measurement error of 0.10 - 0.20Ω. To obtain an accurate measurement, the measured value should subtract the value displayed when the two test leads are short-circuited. - When measuring high resistance above 1MΩ, it is normal for the measurement to take a few seconds to stabilize.
- Page 10 Ca p a city m ea su rem en t Set the rotary function dial to Insert the black test cable into the COM connector and the red one into the INPUT connector. Connect the test leads with the capacitor in parallel. Note: - If the capacitor under test is shorted or its capacitance is above the specified range, the "OL"...
- Page 11 - Insert the black plug of the type K thermocouple into the "COM" socket and the red plug into the "INPUT" socket. Carefully touch the end of the thermocouple to the object to be measured. Wait and the display will show the measured value. Remark: The maximum operating temperature of the TP01 Type K thermocouple is 250˚C/482˚F (or 300˚C/572˚F for short...
- Page 12 7.10 N CV T es t Set the rotary pushbutton to . The LCD displays EF and the device is ready to test the electromagnetic field strength. When the front of the meter comes within 5 mm of the electromagnetic field, the meter will beep and a symbol indicating the strength of the electromagnetic field will appear.
- Page 13 The product has been issued with a CE declaration of conformity in accordance with the applicable regulations. On request from the manufacturer: info@solight.cz, or downloadable from www.solight.cz. P ro d u cer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Česká republika...
Need help?
Do you have a question about the V31 and is the answer not in the manual?
Questions and answers