Advertisement
Quick Links
EN
Digital Multimeter SOLIGHT V15
Thank you for purchasing this product.
Before using it for the first time, read this
manual carefully. Otherwise, you risk
danger to your health and damage to your
device.
Important symbols
Warning! High voltage (danger of
accident)
(AC) alternating current
(DC) direct current
either DC or AC
earthing
Important safety instructions
A fundamental safety precaution when
using this device is to reduce the risk of fire,
electric shock and personal injury.
Therefore, make sure to observe the
following instructions:
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Solight V15
Summary of Contents for Solight V15
- Page 1 Digital Multimeter SOLIGHT V15 Thank you for purchasing this product. Before using it for the first time, read this manual carefully. Otherwise, you risk danger to your health and damage to your device. Important symbols Warning! High voltage (danger of...
- Page 2 1. Never use this device for any other purpose or in any way other than that described in the present manual, otherwise the protection provided by the device may be impaired. 2. Your finger or any other part of your body must not touch the measuring probes.
- Page 3 9. Take extra care when measuring live on a circuit above 60V DC (direct voltage) or 30V AC (alternating voltage). 10. If a battery symbol appears on the display, replace the battery to prevent poor measurement results. 11. Use the device only indoor at altitudes up to 2000m, temperatures between 0°C and +40°C.
- Page 4 • Storage conditions: -10°C to -50°C, humidity up to 85% • Fuse: F 0.5A / 600V, 5 x 20mm • Power supply: 2x AAA 1,5V alkaline batteries • Dimensions: W: 29 x L: 70 x H: 125mm, weight: approx. 128g incl. batteries •...
- Page 5 Direct voltage Scope Resolution Accuracy ± (0.5% + 3 200mV 0.1mV digits) 2000mV ± (0.8% + 5 10mV digits) 200V 100mV ± (1.0% + 5 600V digits) Overload protection: 230V rms AC for 200mV range; 600V rms or 600V DC for other ranges.
- Page 6 Direct current Scope Resolution Accuracy 1μA ±1.8% + 2 2000μA 10μA digits 20mA ±2.0% + 2 100μA 200mA digits ±2.0% + 1 10mA digits Overload protection: fuse 0.5A/600V, F10A/600V Note: 10A within 10 seconds...
- Page 7 Resistance Scope Resolution Accuracy 200Ω 0,1Ω ± 1.0% + 10 digit 2000Ω 1Ω ±1.0% + 4 20kΩ 10Ω digits 200kΩ 100Ω 2000kΩ 1kΩ ±1.0% + 4 digits Maximum circuit voltage: 3V. Overload protection: 15s max. 230V rms. Diode and circuit continuity test Measuring Icon Description...
- Page 8 Operating manual Direct voltage measurement 1. Connect the red test lead to the "VΩmA" socket, then the black lead to ” the "COM socket 2. Set the switch to the appropriate "DC ’ V" range. If you don t know the measured voltage, select the highest range and gradually reduce it until readability is reached.
- Page 9 Alternating voltage measurement Connect the red test lead to the "VΩmA" socket, then the black lead ” to the "COM socket Set the switch to the appropriate "AC V" range. Connect the test leads in parallel with the measured circuit. Read the indicated voltage and polarity from the LCD.
- Page 10 range and gradually reduce it until readability is reached. 3. Connect the test leads in series with the measured circuit. 4. Read the measured current on the display. Note: ” ” • Values "1 or "-1 on the display indicate exceeded measuring range. Choose higher measuring range.
- Page 11 3. Connect the test leads to the measured resistance. 4. Read the measured value on the display Note: • If the measured resistance is connected to the power supply circuit, the power supply must be turned off and all the circuit capacitors must be discharged.
- Page 12 2. Set the switch to the position with symbol 3. Connect the test leads to the measured diode. Red lead to the anode, black lead to the cathode. 4. If "1" is displayed, the diode is connected inversely. 5. Read the approximate value of the cut-off voltage on the display.
- Page 13 Note: If the measured diode is connected to the power supply circuit, the power supply must be turned off and all the circuit capacitors must be discharged. Only then can the test leads can be connected to the measured diode. Acoustic test of circuit continuity 1.
- Page 14 switch to "OFF" and unscrew the screw on the rear side and open the battery cover. Replace batteries with the same type, i.e. 2x AAA LR03 alkaline batteries. Then close the battery cover and re-tighten the screw. Fuse replacement This measuring instrument is equipped with one F0.5A/600V fuse and one F10A/600V fuse protecting the internal circuits of the device.
- Page 15 5. Then reassemble the device, secure the screws and insert batteries. ’ Note: If you don t know exactly how to replace the fuse or if you are not technically competent, have the replacement done by an expert or contact your dealer. Package content user manual test leads set...
Need help?
Do you have a question about the V15 and is the answer not in the manual?
Questions and answers