Page 1
INSTRUCTION MANUAL Alento Vanity 1. When you receive your Newline Vanity package, please check contents for any freight damage. 2. If any damage has occured, advise your supplier within 8 hours. 3. Do not install any faulty product as this will invalidate later claims.
Complete tiling prior to vanity installation. Warranty claims don’t cover renewal of wall finishings. IMPORTANT NOTICE! (To Both Installer and House Owner/Occupier) All personnel have the specific responsibility to protect this Vanity from water damage. Newline Vanity surfaces are water resistant, but not classified as waterproof.
Page 3
ALENTO Wall Hung Vanity Installation Mark the height (from 800mm to 900mm - owners choice) and locate top and bottom frame points to secure the unit. FASTENING TO THE WALL: A wall hung vanity needs solid fixing for attachment to the wall. Provide this prior to fixing the wall lining.
Page 4
ALENTO Floor Standing Vanity Installation Check the walls and floors are plumb, level and flat. Take remedial action or compensate for existing discrepancies in the installation process. Locate the necessary framework in the wall to fasten the cabinet securely. For installation of pipes it is easier to remove the doors and the drawers. Store them carefully and number their locations (drawer removal and reinstall, page 5).
Page 5
Note: if drawer stops short of closing, this is due to the “soft close” mechanism needing reactivation. Push the drawer shut gently until it clicks. The soft close should now be fully active. FOR SPECIFICATIONS PLEASE GO TO NEWLINE.NZ...
Page 6
This is by no means comprehensive but indicative of chemical harm that must be avoided. CONTACT 54 Unutoto Place, Tauriko, Tauranga, 3171 Freephone: 0508 639 5463 Phone: 09 444 2053 Email: info@newline.co.nz newline.nz...
Need help?
Do you have a question about the Alento Vanity and is the answer not in the manual?
Questions and answers