Subscribe to Our Youtube Channel
Related Manuals for Diamond Multimedia STEALTH 3D 2000
Summary of Contents for Diamond Multimedia STEALTH 3D 2000
- Page 1 STEALTH 3D 2000 (PCI) INSTALLATION GUIDE Rel. 0996 Copyright by Diamond Multimedia Systems Inc.
-
Page 2: Table Of Contents
Table of Contents Introducing your Stealth 3D 2000 ......................3 Card Layout............................3 System Compatibility..........................4 Installing the Card.............................5 Installing Windows 95 Software........................6 Installing the Basic Software and Utilities .....................6 InControl Tools 95 for Windows® 95 ....................7 Quick start instructions..........................7 Installing Windows 3.1x Software......................8 Installing the Basic Software and Utilities .....................8... -
Page 3: Introducing Your Stealth 3D 2000
Two versions of the Stealth 3D 2000 are available: Stealth 3D 2000 with 2 MB EDO-DRAM - no sockets for memory upgrade Stealth 3D 2000 with 2 MB EDO-DRAM and sockets for memory upgrade to 4 MB EDO-DRAM... -
Page 4: System Compatibility
Stealth 3D 2000 with memory upgrade sockets DB-15 Monitor Connector Local Peripheral Bus Connectors EDO DRAM Memory Chips BIOS Controller Sockets for DRAM Memory Upgrade System Compatibility The card uses a 64-bit graphics accelerator chip designed for graphics programs such as Windows 95, Windows 3.1x and AutoCAD. The chip is backwards compatible with VGA. -
Page 5: Installing The Card
Installing the Card The installation is easy and straightforward. These installation instructions presume that you are familiar with your computer system. You may need to seek assistance from your dealer or consult your computer operations guide. Warning! Prevent static electric damage. Static charges can cause severe damage to microcircuits, but here are some easy ways to see that it doesn't happen: Hold the graphics card by its edges only. -
Page 6: Installing Windows 95 Software
Installing Windows 95 Software Installing the Basic Software and Utilities In order to use your card in your PC it is necessary to install a package of basic programs, regardless of the operating system in use. Please execute the following steps in order to install the basic software. -
Page 7: Incontrol Tools 95 For Windows® 95
InControl Tools 95 for Windows® 95 InControl Tools 95 provides a set of easy-access display and desktop utilities that help you maintain a picture perfect environment for work or pleasure. With InControl Tools 95 you can: Use a popup menu to instantly switch desktop and viewport resolutions and zoom in and out on your viewport. -
Page 8: Installing Windows 3.1X Software
Installing Windows 3.1x Software Installing the Basic Software and Utilities In order to use your board in your PC it is necessary to install a package of basic programs, regardless of the operating system in use. Please execute the following steps in order to install the basic software. -
Page 9: Autocad For Windows - Bigfocus Driver
AutoCAD for Windows - BigFocus Driver The BigFocus driver is supplied for use with AutoCAD 13 running under Windows 95 or under Windows NT. The driver allows view and layer manipulation, spyglass lense, bird's-eye view, and view export. Using BigFocus is self-explanatory but if you should need further information, consult the integrated online help and/or the separate BigFocus documentation. -
Page 10: Installing Options
Memory Extension Necessity of Memory Extension Your Stealth 3D 2000 is fitted with 2 MB EDO-DRAM or 4 MB EDO-DRAM. This memory size is adequate for many applications on the market. 4 MB EDO-DRAM is recommended for higher resolutions, faster refresh rates, and/or higher color depths, or, if you want or need z-buffering (Direct-3D/Games). - Page 11 Step 2: Install the four memory upgrade chips to the designated sockets on the graphics card - refer to the illustration. a) Make sure that pin 1 on the chip, marked with a dot on the beveled edge, connects to pin 1 of the socket, marked by a beveled corner ( b) Press the memory upgrade chips evenly into the sockets until they are fully seated.
-
Page 12: Having Problems
If you have tried all above suggestions, please contact the Technical Support for additional help. Note : The Stealth 3D 2000 card uses the following address areas. I/O Address 3B0-3DF... -
Page 13: Video Problems
Video Problems Video Flicker Scrambled Video Screen Display is Small Monitor is not Listed Solutions Video Flicker Increase the vertical frequency for the resolution that you are using. Do not specify a frequency that exceeds your monitor´s frequency range. Scrambled Video ... -
Page 14: Difficulty Starting Windows And Other Applications
The following examples will help you to reserve the required memory area for your Stealth 3D 2000 card. Optimize your memory use again after having modified your CONFIG.SYS file. For using QEMM386 edit the following line in your CONFIG.SYS file DEVICE=C:\QEMM\QEMM386.SYS... -
Page 15: General Protection Fault (Gpf) In Windows
Diamond for technical support: The exact designation of your Diamond Multimedia product The operating system you are using, as well as information about the computing environment in which you use your product ... -
Page 16: If You Need Help
Diamond for technical support: The exact designation of your Diamond Multimedia product The operating system you are using, as well as information about the computing environment in which you use your product ... -
Page 17: Diamond's Online Services: Bbs, Compuserve, Internet
Diamond’s Online Services: BBS, CompuServe, Internet Among other things, you can find the following kinds of information in the Diamond BBS as well as in Diamond’s CompuServe forums and Internet services: the most current releases of Diamond drivers and software updates, ... -
Page 18: Diamond's Fax-Back System
Diamond’s Fax-back System You also have access to a variety of information through our fax-back system. All you need is a touch-tone phone to select documents such as: technical tips, tricks and suggestions, compiled by our support staff; answers to frequently asked questions, and ... -
Page 19: Diamond Expertline: Technical Support Hotline
Diamond for technical support: The exact designation of your Diamond Multimedia product The operating system you are using, as well as information about the computing environment in which you use your product ... -
Page 20: Diamond Worldwide: Support Services In The Usa
In addition to the European services described above, a number of information services are available from the support staff at Diamond in the USA. These include: Diamond Multimedia Inc., USA +1 - 408 - 325 - 7080 up to 2.400 Baud +1 - 408 - 325 - 7175 up to 14.400 Baud... -
Page 21: Trademarks, Copyright And Warranty
Trademarks, Copyright and Warranty Trademarks The Stealth 3D 2000 is a trademark of Diamond Multimedia Systems, Inc. All other products named in this manual are either trademarks or copyrights of their respective owners. Copyright Notice This manual is copyrighted. All rights reserved. This document may not, in whole or... -
Page 22: Fcc And Ce Information
FCC and CE Information This device complies to CE Certification pursuant to EN55002 IEC 801-2, 1991. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the STEALTH 3D 2000 and is the answer not in the manual?
Questions and answers