Advertisement
Quick Links
X-Effects LED
Quick Start Guide
1
Prior to operating the X-Effects LED Projector, it is
recommended that the unit's Dynamic Effect Gobos
(96mm) be inserted into the fixture's Motor Rotation
Module. To access the Motor Rotation Module, loosen
the four, recessed quick-turn screws on the front of
the unit and remove the Lens Tube Module.
Quick-turn screws
3
Replace the front Lens Tube Module and securely tighten the four quick-turn screws.
Insert lens tube and UTL Connector cable.
HO Production Rental Kit
®
Safety cable
mounting point
See other side to access product information on our website: WWW.ROSCO.COM
2
Insert the Dynamic Effect Gobos into the
rotation carriers, ensuring that the flat portions
of the effects wheel flanges are facing each
other. Improper orientation of the effects wheels
can cause damage to the unit or may not
produce the desired illumination effect.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rosco X-Effects LED HO Production Rental Kit
Summary of Contents for Rosco X-Effects LED HO Production Rental Kit
- Page 1 Quick-turn screws Safety cable mounting point Replace the front Lens Tube Module and securely tighten the four quick-turn screws. Insert lens tube and UTL Connector cable. See other side to access product information on our website: WWW.ROSCO.COM...
- Page 2 70º lens Two empty slots for additional Rosco Dynamic Gobos Rosco Dynamic Gobos included: Rosco Dynamic Gobos included: •Dune Image Glass •X-Effects LED 4-Pattern Gobo Wheel - Linear •Coalescing Bubbles Image Glass •X-Effects LED 4-Pattern Gobo Wheel - Foliage •Animation Wheel 1 Steel...
Need help?
Do you have a question about the X-Effects LED HO Production Rental Kit and is the answer not in the manual?
Questions and answers