To change this . . .
Workgroup name
Get an IP address
automatically
Use this IP address
IP address
Subnet mask
Enable FTP server
2. After making the necessary changes, click "Apply."
3. When the message of confirmation appears, click "OK" for the changes to
take effect.
Reminder: If you are using Filezilla as your FTP data transfer tool, please
follow the setting Not to Check and Enable the function of "use multiple
connections to transfer files", or if you are not using Filezilla, please also
refer to the setting.
Do this . . .
Enter the new name for the specific workgroup.
The name can be up to 15 characters long,
including characters of letters, numbers, and
hyphens.
If you have a DHCP server on your network,
the server can get its IP address from that
DHCP server automatically.
If you do not have a DHCP server, you have to
specify an IP address, subnet mask, gateway IP
address, and DNS server.
Allow your storage device to perform as an
FTP server, and suggests to download data
transfer tool at
http://filezilla.sourceforge.net/
35
Need help?
Do you have a question about the NAS04 - annexe 2 and is the answer not in the manual?