Table of Contents
Advertisement
8. Make sure that your NAS is still powered off. Now press and hold the Reset
Button ( ) by inserting a small rod such as straightened paperclip.
9. Power up the NAS by pressing the Power Button ( ) and keep holding
down the Reset Button ( ) . Wait up to 15-20 seconds to ensure the RAID
RAID
indicator (
) blinks blue. Release the reset button when you see the
blue light permanently and is not blinking any more.
22
Advertisement
Table of Contents
Need help?
Do you have a question about the NAS04 - annexe 2 and is the answer not in the manual?