Table of Contents
Advertisement
LAN
Modify LAN Interface Settings
STEP 1﹒Select LAN in Interface and enter the following setting:
Enter the new IP Address and Netmask
Select Ping and HTTP
Click OK (Figure3-1)
The default LAN IP Address is 192.168.1.1. After the Administrator setting the
new LAN IP Address on the computer , he/she have to restart the System to make the
new IP address effective. (when the computer obtain IP by DHCP)
Do not cancel WebUI selection before not setting Permitted IPs yet. It will cause
the Administrator cannot be allowed to enter the SMC BR21VPN's WebUI from LAN.
Figure3-1 Setting LAN Interface WebUI
53
Advertisement
Table of Contents
