Functions And Features; Settings For Router - SMC Networks BR14VPN - annexe 3 Manual

3 | Functions and Features

Broadband Modem and NAT
Router
10/100 Mbps Ethernet Interface
Auto-sensing Ethernet Switch
VPN Supported
Firewall
DHCP Server Supported
Web-based Configuration
Network Filter Supported
Universal Plug and Play (UPnP)
Supported
Virtual Server Supported
User Defined Application
Sensing Tunnel
DMZ Host Supported
SNMP Supported
System Time Supported
Virtual Computers Supported
URL Blocking Supported
Schedule Rule
Routing Table Supported
2
Connects multiple computers to a broadband (cable or DSL)
modem, and/or Ethernet router to access the Internet.
Provides a 10/100 Base-TX interface to connect to a DSL or
cable modem for broadband Internet access.
Equipped with a 4/8-port auto-sensing Ethernet switch.
Supports multiple IPSec sessions and has built-in PPTP and
L2TP VPN servers.
All unwanted packets from outside sources are blocked to
protect your intranet.
All networked computers can retrieve TCP/IP settings
automatically from this device.
Configurable by any networked computer's Web browser
using Netscape or Internet Explorer.
The Packet Filter lets you control access to a network by
analyzing the incoming and outgoing packets; this lets you
either letting them pass or halt based on the IP address or
the source and destination.
Enables devices such as PCs, routers and printers to be
plugged into a network and ensure automatic recognition.
Lets you make your Website, FTP site, and other services on
your LAN accessible to Internet users.
Lets you define the attributes to support special applications
that require multiple connections like Internet gaming, video
conferencing, Internet telephony, and so on. This device
can sense the application type and opens a multi-port tunnel
for it.
Enables a computer to be fully accessible to the Internet.
This function is used when the special application sensing
tunnel feature is insufficient to allow an application to
function correctly.
SNMP (Simple Network Management Protocol) is a protocol
that lets users remotely manage a computer network by
polling and setting terminal values, and monitoring network
events.
Lets you synchronize system time with the network time
server.
The virtual computer lets you use the original NAT feature,
which lets you setup the one-to-one mapping of multiple
global and local IP addresses.
Lets you block hundreds of Website connections by simply
entering a keyword.
Lets you set a time schedule for different services.
Allows you to determine which physical interface address to
use for outgoing IP data grams. If you have more than one
router and subnet, enable the routing table to allow packets
to find the proper routing path and the different subnets to
communicate with each other.