Subscribe to Our Youtube Channel
Related Manuals for Truper INDUSTRIAL ESMA-4512N
Summary of Contents for Truper INDUSTRIAL ESMA-4512N
- Page 1 Manual Angle 1.6 Hp 4 1/2” grinder Power Wheel Applies for: Model Code ESMA-4512N 12873 ESMA-4512N Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General power tool safety warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for angle grinders of fatal injuries please read and understand this Manual before Parts using the tool. -
Page 3: Technical Data
Avoid the risk of electric shock or severe injury. When the power cable gets damaged it should only be replaced by the manufacturer or at a TRUPER Authorized Service Center. The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use. -
Page 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For Angle Grinders
• Do not operate the tool while it is being transported to movement. If detected, unplug the tool and take it to a your side. TRUPER Authorized Service Center. DANGER • Sparks caused when grinding may be • See if the wheel rotates freely. - Page 6 Safety warnings for angle grinders DANGER KICKBACK (Sharp Recoil) Do not use accessories that are not specifically designed and recommended by the manufacturer. The fact that the Kickback (sharp recoil) is a sudden reaction when a rotating wheel, backrest, brush, or other accessory gets accessory may be installed on the power tool does not ensure safe operation.
-
Page 7: Parts
Parts Protective Axis Guard Lock Handle Clamp lever ” grinding Lock Nut wheel included Axis Wrench (Included) Lock Auxiliary Handle Protective Outer Guard Flange Wheel Inner Flange Power Supply Cord Auxiliary Handle Assembling Hole Clamp lever Trigger Lock-on Power cord Carbon switch button... -
Page 8: Start Up
Preparation Auxiliary Handle Assembly CAUTION Before performing any operation, always make sure that the auxiliary handle is firmly installed. Set the auxiliary handle in one of the two positions according to the operator's preference and the job to perform. Start Up The angle grinder is a manual power tool. -
Page 9: Maintenance
Start Up Useful Tips • To prevent damaging the wheel work using the wheel into the right position. • Press onto the work piece using less force than the tool’s weight to avoid overload and damaging the motor and wheel. •... -
Page 10: Notes
Notes ENGLISH... -
Page 11: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a TRUPER Authorized Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800-018-7873 to get information about the nearest Service Center. -
Page 12: Warranty Policy
06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. TRUPER will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.
Need help?
Do you have a question about the INDUSTRIAL ESMA-4512N and is the answer not in the manual?
Questions and answers