SMC Networks 7901BRA2 - annexe 1 Manual page 41

2. In the Command Prompt window, type ipconfig /release and press
the Enter key.
3. Type ipconfig /renew and press the Enter key. Verify that your IP
Address is now 192.168.2.xxx (where x is between 2 and 254), your
Subnet Mask is 255.255.255.0 and your Default Gateway is
192.168.2.1. These values confirm that your Barricade is functioning.
4. Close the Command Prompt window.
Your computer is now configured to connect to the Barricade.
W XP
INDOWS
3-15