SMC Networks 7004VBR - annexe 1 Quick Start Manual page 9

SMC7004VBR_QS.joint.qxd 19/9/02
4. Click "OK," and then click "OK" again to close the "Internet
Options" window.
Netscape
1. Open Netscape and click the stop button. Click "Edit," then
click "Preferences..."
2. In the "Preferences" window, under "Category" double-click
"Advanced," then click "Proxies." Select "Direct connection to
the Internet." Click "OK."
12:43 pm Page 17
Step 3. Obtain IP Settings From Your Barricade
Now that you have configured your computer to connect to your
Barricade, it needs to obtain new network settings. By releasing
any old IP settings and renewing them with settings from your
Barricade, you will also verify that you have configured your
computer correctly.
1. From the Windows desktop, click the "Start" button, then
"Programs," then "Accessories," and then click "Command Prompt."
2. In the "Command Prompt" window, type "IPCONFIG /RELEASE"
and press the <ENTER> key.