SMC Networks 7004VBR User Manual page 103
Broadband router with 4-port switch
Hide thumbs
Also See for 7004VBR:
- Installation manual (6 pages) ,
- Manual (43 pages) ,
- Quick start manual (109 pages)
Table of Contents
Advertisement
Symptom
Management Problems
Cannot connect using
the web browser
Forgot or lost the
password
Troubleshooting Chart
•
Be sure to have configured the Barricade with a valid
IP address, subnet mask, and default gateway.
•
Check that you have a valid network connection to the
Barricade and that the port you are using has not been
disabled.
•
Check the network cabling between the management
station and the Barricade.
•
Press the Reset button on the front panel (holding it
down for at least five seconds) to restore the factory
defaults.
T
ROUBLESHOOTING
Action
A-3
Advertisement
Table of Contents
