Faq - PROLiNK Pixelview MVGA-NVTNT2MA User Manual

5. FAQ

Q: While installing on a Windows 95 or 98 operating system, my
computer loses the Vertical Sync.
A: Please check your monitor's specifications. Some monitors connect the DDC
signal to ground: Which causes the BIOS to not detect your monitor. Therefore,
causing your MVGA-NVTNT2MA/AL/AD to not receive any data or refresh rates.
Q: I can' t install the driver on my Windows 95 system.
A: If your operating system isn't the Windows 95 OSR2.1 version, you won't be able
to install the driver.
To fix the problem:
Please change your operating system to the OSR2.1 version.
Windows 95 OSR2.1 Installation.
1.
Install Windows 95 OSR2.1
2. Execute USBSUPP
3. Install DirectX ver 5.0 / 6.0 or higher
4. Install the VGA driver
Q: The image on my monitor keeps on flickering and the driver can' t
change the refresh rate.
A: The problem is due to a failed DDC monitor detection.
To fix the problem:
1. Go to 'Settings'è'Control Panel' è'Display'
2. Select 'Settings' page
3. Click 'Advanced Proper ties'
4. Select 'Monitor ' page
5. Click 'Change'
6. Select 'Show All Devices' and choose your monitor type. If your monitor type
is not listed, Please select one that is as similar as possible.
14