Installing Drivers On Windows Nt 4.0 - PROLiNK Pixelview MVGA-NVTNT2MA User Manual

3.5 Installing drivers on Windows NT 4.0

1. Start Windows NT, switch display properties to VGA mode (16 colors, 640x480
pixels), then restart your computer.
2. After your computer restarts, right-click the desktop and click 'Proper ties'.
3. Click the 'Settings'tab.
4. Select 'Display Type'.
5. Select 'Adapter Type' and click 'Change'.
6. Click 'Have Disk'.
7. Insert the AutoRun driver into the CD-ROM drive.
8. Click (assuming your CD-ROM disc driver X) 'Browse CD' to select the path
'X:\TNT2MA\NT40' of the display driver for Windows NT.
9. You will see a list of nVIDIA Series driver. Select Vanta driver and then click
'OK'.
10. Windows NT will once again prompt for confirmation. All appropriate files are
then copied to the hard disk. When all files are copied, go back to the 'Display
Proper ties' box by clicking 'Apply' or Click 'Close'.
11. The 'System Setting Change' dialog box is displayed. Click 'Yes' to restart
Windows.
12. Windows NT will restart with the default settings. The display applet will appear to
allow for mode selection.
11