Advertisement
2.2 Installing the graphics adapter card
1. Turn OFF your computer, remove the computer case, and then ground yourself by
touching the power supply of the computer.
Note: Before installing the graphics VGA card you must first set the VGA
option to either standard VGA or Standard Display VGA.
2. Remove your old graphics card, and install your new graphics card into the AGP
slot.
MVGA-NVTNT2MA/AL/AD
3. Align and secure the mounting bracket of the card to the computer and replace the
computer case.
4. Connect the monitor cable to the DB-15 connector of the card.
5. Turn ON your computer.
AGP slot
PCI slot
AGP mainboard
6
Advertisement
Need help?
Do you have a question about the Pixelview MVGA-NVTNT2MA and is the answer not in the manual?
Questions and answers