Table of Contents
Advertisement
1. Select 128-bit or 64-bit in the Encryption field.
2. In the Key Type field, select ASCII or Hex.
3. In the Default Key field, select one key as the default key that
you want to use for encryption.
4. Manually type in a string of characters in the corresponding
key number field that you selected in step 3.
5. Click Apply changes to allow the settings to take effect.
When setting up WEP without using the Passphrase function,
Note:
if the Key Type is set to Hex, only Hexadecimal characters
(range: 0~9 and A~F) can be used. When encryption is set to
64-bit, a maximum of 10 Hex characters can be entered in the
Key field. When encryption is set to 128-bit, a maximum of 26
Hex characters can be used. If the Key Type is set to ASCII,
and encryption is set to 64-bit, then 5 ASCII characters can be
used in the Key field. For 128-bit encryption, 13 ASCII
characters can be used.
Wireless Card Manager
15
Advertisement
Table of Contents
