Advertisement
Available languages
Available languages
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed.
1
2
3
4
Insert the tape into Deck 1.
Insert the tape with the side to be recorded
on first facing out
from the unit, and wind
up the tape with <.
Press CD and load the disc(s).
Press CD EDIT/CHECK
twice while
pressing
SHIFT on the remote control.
"EDIT" and "PRGM" are displayed.
PRGM
EDIT
When
"AI"
is displayed,
press
CD EDIT/CHECK
while
pressing SHIFT again.
Press numbered
buttons on the remote control
to designate the tape length.
10
to
99 minutes can be specified.
. <M,
-
or MULTI JOG are also available to designate
the tape length.
Tape length
Tape side A (front side)
Maximum recording
time for side A
5 Press one of DISC DIRECT PLAY 1-5 to select a
disc.
Then, press numbered
buttons O-9 and +10 on
the remote control to program a track.
To select
disc 4 or 5 from the remote
control,
press
DISC
DIRECT PLAY 4 or 5 while pressing SHIFT.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and O.
Remaining
Programmed
Selected
track number
time on side A
track numbers
6
7
8
9
Repeat step 5 for the rest of the tracks for side
A.
A
track whose playing time is longer than the remaining time
cannot be programmed.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side B and program
the tracks for side B.
Tape side B (reverse side)
Press CD EDIT/CHECK while pressing SHIFT to
select side A and press
on Deck 1.
~
flashes for 10 seconds, and then CD play and recording
of edited tracks for the first side start simultaneously. When
the end of the tape is reached, Deck 1 enters the recording
stop mode. After entering the recording stop mode, go to
step 9.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
"B"
is displayed.
10 Turn over the tape in Deck 1 and press @to start
recording.
Recording starts.
To stop recording
Press
/A
on Deck
1. Recording
and CD play stop
simultaneously.
To check the order of the programmed track numbers
Before recording,
press
CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press <
or
M-
repeatedly.
Track number
Programmed
track numbers
Disc ~umber
Progra'm number
To
change the program of each
side
Press
CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press
CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press
CLEAR
twice
in stop mode so that "EDIT" disappears
on Ithe display.
mm
Recording is inhibited if the erasure prevention tab
for the side
of the tape facing out from the unit is broken off.
s Up to 30 tracks can be programmed
from any of the inserted
discs.
. "FULL"
is displayed
if you attempt
to program
more than 30
tracks.
Prog;am
number
ENGLISH I
7
Advertisement
