Table of Contents
Advertisement
Hardware Installation
Hardware Installation
Warning: Network cards are sensitive to static electricity. To
1. Find an available type II or type III CardBus slot in your laptop.
2. With the Adapter's 68-pin connector facing the CardBus slot,
and the "EZ-Stream" label facing up, slide the card completely
into the slot as shown below.
Note: The SMC2336W-AG Wireless CardBus Adapter allows
you to "hot swap" the card any time, even when your
notebook is powered on.
3. For Windows 98/Me/2000, CardBus specification is required.
Please check the documents for your Cardbus adapter driver
before installing the driver and utility software for the
SMC2336W-AG adapter.
6
protect the card, avoid touching its electrical
components, and touch the ground often to equalize
the static charges, before handling the card.
Advertisement
Table of Contents
