Hardware Installation; Driver Installation - SMC Networks EZ Connect SMC2662W User Manual

• Another IEEE 802.11b compliant device installed in your
network, such as the SMC2655W Wireless Access Point, or
another PC with a wireless adapter.

Hardware Installation

1. Select an available USB port on the PC.
2. Carefully insert the USB cable's Type-A plug (i.e., the flat plug)
into the USB port and press until it is firmly seated in the port.
3. Insert the other end of the cable into the SMC2662W.

Driver Installation

Warning: Backup your driver CD and use the copy as the working
The CD-ROM that comes with the package contains all the
software/drivers available for the EZ Connect Wireless USB
adapter. New or updated drivers can be downloaded from SMC's
web site at:
http://www.smc.com
For installation in Windows 98/Me see the following pages. For
Windows 2000 go to "Windows 2000 Driver Installation" on page
21, and for Windows XP see "Windows XP Driver Installation" on
page 24.
disk to protect the original from accidental damage.
H I
ARDWARE NSTALLATION
5