Windows Xp - SMC Networks 1255TX-1 - annexe 1 Manual

Windows XP

Step 1: After you have inserted the SMC1255TX-1 PCI Card in your machine and turned it back on,
the Operating System will automatically recognize and install the adapter using the drivers built-into
Windows XP. If you wish to upgrade to the latest drivers available on the CD-ROM, please continue
and read the directions below.
Step 2: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance] icon
and select [System]. Click the [Hardware] tab and click [Device Manager]. Then double-click the
ethernet adapter. (Note: If the adapter was not installed properly, you may see "PCI Ethernet
Controller" instead. Double-click on that device.)
20