AudioEngine A2+ Quick Start Manual page 9

WIRELESS
CONNECTION
On your device turn on Bluetooth and go to Bluetooth
preferences.
Select "Audioengine A2+" to pair and connect.
The Pair indicator light on the A2+ rear panel should now
be solid.
Play your music and adjust the volume on both your
speakers and your device to your desired listening levels.
*If connecting a turntable via Bluetooth, ensure the preamp switch
is in the 'on' position, then follow the connection steps previously
outlined.
To add additional devices put A2+ back into pair mode
by disconnecting A2+ from your device or by pressing
the Pair button on the A2+ rear panel for about 3 seconds
until the pair indicator light starts flashing. Repeat step 2
to connect another device.
A2+ can wirelessly connect to only one device at a time,
however it will pair and remember up to six different
devices.