Operation; Putting Into Operation; Switching On - VDO MG 3000 Owner's Manual

OPERATION

Operation
Phone operation is mainly via the specific phone menus of the navigation system. The
remote control buttons have the following functions:
OK Confirmation of the selected menu items /
activation of the button highlighted with the cursor in the menus
MENU Return to navigation (Start Menu)
4, 6, 8, 2 Control of the cursor / selection of menu points
+, - Adjustment of phone volume during telephoning
1 The two steps of highlighting a menu entry with the cursor followed by pressing the
OK button on the remote control are referred to in the sections below as "selecting" a
function / option.

Putting into operation

There must be a suitable mobile phone in the holder in order to use the hands-free unit.

Switching on

The hands-free unit is automatically switched on with the ignition.
1 On some mobile phones (see associated operating instructions), a special symbol (car
symbol) or a hands-free message is displayed when the phone is inserted in the holder of
the hands-free unit.
1. Switch on the ignition.
The navigation system starts.
2. Select "Telephone" option.
When the mobile phone is ready for operation, the phone menu appears.
If the phone is not inserted in the holder or is not ready for operation, corresponding
information is displayed.
In this case, check that the phone is correctly inserted in the holder, that it is switched
on, and that the PIN number has been entered.
10
Start Menu
Navigation
Map
Settings
Telephone
9:17
Trip computer
Address book
Travel info
Emergency
Stand-by
TMC 01.05.2002