Wacom Bamboo Ink Plus Manual

Table of Contents

Contents

1 Overview
2 Get started with your Bamboo Ink Plus
3 Bamboo nib kit
4 Documents / Resources
- 4.1 References
- 4.2 Download manual

Overview

Bluetooth button
Bluetooth button to launch Windows Ink Workspace, customizable in Windows pen settings.
Side-switches
Two side-switches; Tip-side switch for power on/off; Both switches for changing protocol.
Pen Nib
Exchangeable pen nib

Get started with your Bamboo Ink Plus

Windows device update Confirm your stylus driver is up to date. Go to: www.wacom.com/inkplusgo
To get started with your Bamboo Ink Plus
1. Connect your stylus to your computer or USB charger with the included cable.
2. Turn on your stylus by pressing the tip-side switch.

Changing the protocol setting
If the stylus does not work on your device, press and hold both side-switches at the same time for 2 seconds to change the setting.

Pair your Bamboo Ink Plus with your device
1. From the Windows Start menu, select Settings > Devices > Bluetooth® and other devices. Make sure Bluetooth is "On".
2. Hold the Bluetooth button for 6 seconds. The LED starts blinking.
3. Select "+ Add Bluetooth or other devices". From the list of devices, select "Bamboo Ink Plus" and click on "Pair".

Open Windows Ink apps
Click Bluetooth button to open Windows Ink Workspace.

Double click to open Screen Sketch.

Click and hold to open Sticky Notes.

Depends on devices, setting may differ. You can also change what the Bluetooth button does in Settings > Devices > Pen & Windows Ink.

Bamboo nib kit

From left to right: firm, soft, blue On certain devices the blue nib from the nib kit can enhance your pen experience. Please check for device compatibility.