Wacom Creative Stylus 2 (CS-600P) Manual

What's in the box

• Pen case
• Stylus

Setting Up

1. Open your iPad settings.
2. Enable Bluetooth^® wireless technology.
3. In "General" settings, switch off "Multitasking Gestures".
4. Open a compatible app and enable the stylus support in this app.
   Check intuoscreativestylusgo.wacom.com for a list of apps supporting the stylus and for detailed instructions.
5. Press side-button on stylus -> LED flashes blue.
6. LED blue for 2 seconds -> Pairing activated.
7. Repeat steps 4-6 when pairing with another app for the first time.
   See the illustration "Fig-1".
   Hold the pen so that the part (a) away from the LED touches your hand. In use, avoid touching the part (b) near the tip. Otherwise the pen may not be recognized correctly by the tablet.
   

Charging

intuoscreativestylusgo.wacom.com