VDO CD 2100 User Manual page 13

Hide thumbs Also See for CD 2100:
Table of Contents

Advertisement

Useful tips
Display shows 'NO TA', and set beeps at intervals.
• The tuned station becomes too weak to enable
the reception of Traffic Announcements. Use
search tuning to find another station.
• If the TA mode is switched on, search tuning
only selects stations which enable the reception
of Traffic Announcements.
Interrupting Traffic Announcement/News
mode
If you do not wish to continue listening to a
particular Traffic Announcement or News mode,
you can interrupt it without switching off the mode.
• Interrupt TA/NEWS :
– The set will return to the previous operating
mode.
RDS MEMO STORE
It is possible to store up to 50 stations in
alphabetical order on this set in a separate FM
memory.
LOADING RDS MEMORY
To load all the receivable RDS stations of the
current reception area into the RDS memory.
• Select an FM waveband :
• Activate RDS MEMORY :
- The set mutes. When the search is completed
the set beeps again and you hear the first
alphabetically stored station.
SCROLLING THROUGH THE RDS MEMORY
• Activate/Deactivate alphabetical station
selection :
- If you hear a beep and cannot select station
according to alphabetical order, see 'LOADING
RDS MEMORY' to load RDS station in the
memory first.
• Select the desired station :
* Depending on version
Useful tips
You can switch off RDS features if not in use.
• See INITIAL SETTINGS; select Option 'RDS'
and set Choice to 'OFF'.
- All above RDS related features e.g. A-Z,
MEMO,
key, etc... will be deactivated when
Option 'RDS' is set to 'OFF'.
Display shows 'PI SEARCH'.
• A preset has been requested but the frequency
is not available or is lost.
Display shows 'TP LOST'.
• Station has turned off the TP signal intentionally
or the signal is too weak.
Display shows 'NO PTY'.
• Search launched but no stations found.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd 2200Cr 2100Cr 2200

Table of Contents