INSTALLATION • Blue lead A5 (Electronic/Motor Aerial) If your car is equipped with ISO connectors, This radio can provide a 12V signal for the simply insert them in connectors of the car radio. control of an automatic motor aerial or the If not, you can use an adaptor cable (Refer to the supply of an electronic aerial by connection.
OTHERS CONNECTIONS (fig.2) TELEPHONE IN Line-output * • If your car telephone or the car kit of your mobile • You can connect a power amplifier (with 2 phone provides both the mute signal and additional loudspeaker) to this set with the RCA loudspeaker connection, its output can be cable.
Page 4
MOUNTING METAL SLEEVE (fig.4) • Install the metal sleeve (dimension 182x53 mm) in the dashboard. For optimal performance of the CD player*, the metal sleeve should be positioned horizontally (between -10 and +30 • Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver. MOUNTING RADIO This radio can be properly installed either from conventional Front Mounting or Rear Mounting.
Page 5
SECURITY SECURITY LIGHT • When the car ignition is switched off and the For theft protection this set is provided with the detachable front is removed, the red light following security features : flashes. DETACHABLE FRONT Take the detachable front with you when leaving Useful tips the car.
INITIAL SETTINGS It is possible to modify many of the set's initial settings according to your preferences. • Enter the Initial Settings menu. • Select one of the option you want to modify • Alter the Choice. • Leave the Initial Settings menu : The set automatically leaves the Initialisation mode about 1 minute after your last operation.
Page 7
INITIAL SETTINGS SCAN [5, 10, 15] Select the scan time (station or track). TIME * [24H, 12H] Select desired clock format. (See 'SETTING THE CLOCK'). CLK * [MAN, AUTO] Select 'AUTO' to activate RDS clock or 'MAN' to set clock manually.
SPECIAL FUNCTIONS SDVC (SPEED DEPENDENT VOLUME CLOCK * CONTROL) AND SPEED WARNING This set has a clock that can either be manually • See INSTALLATION for connection instructions. set by you or can be automatically updated via the RDS signal. SDVC * To compensate for surrounding noise this function SETTING THE CLOCK (MANUALLY)
Page 9
SPECIAL FUNCTIONS STORE A SPEED TEMPERATURE WARNING * Ensure in 'INITIAL SETTINGS' option 'SPD' You can connect a temperature sensor to this set is set either to 'KM/H' or 'MPH'. to give you a visible and audible warning automatically when the outside temperature 1.
Page 10
AUDIO ADJUSTMENT MUTE (Silence) : • Mute the set or cancel the mute : ON/OFF • Switch the set on or off : You can use the set even when the car ignition The silent period may be interrupted by traffic is switched off.
RADIO Useful tips WAVEBAND Detachable front of set feels warm? • Select the desired waveband : • Some heat is always generated by the set. Volume fluctuates. The display shows : • Check SDVC connections and calibration. If FM1 or FM2, MW1, or MW2, or LW problems persist consult your dealer.
Page 12
MANUAL TUNING (if you know the frequency AUTOMATICALLY STORING STATIONS of the required station) (AUTO-STORE) • To switch to manual tuning : By simply pressing one key you can automatically store 10 strongest FM stations (on the FM2 band) or 10 strongest MW stations (on the MW2 band). When you use Auto Store, the new stations replace •...
RADIO DATA SYSTEM (RDS) ON FM ALARM MESSAGES (PTY Alarm) This set automatically receives emergency Many FM stations broadcast RDS information. messages made by the broadcaster. This set uses the RDS information to offer you – During the messages the display shows many advantages including : 'ALARM' and the station-name alternately.
Page 14
Useful tips Useful tips Display shows 'NO TA', and set beeps at intervals. You can switch off RDS features if not in use. • The tuned station becomes too weak to enable • See INITIAL SETTINGS; select Option 'RDS' the reception of Traffic Announcements. Use and set Choice to 'OFF'.
Page 15
CASSETTE PLAYER * • Activate/Deactivate FAST FORWARD : PLAYBACK 1 Open the front. 2 Slide the cassette, with the open side to – You hear the radio during this operation. If you the right into the cassette opening. continue fast winding until the end of the tape, 3 Close the front.
Page 16
CD PLAYER* AND CD CHANGER* PREVIOUS / NEXT TRACK Select the desired track. CD PLAYBACK (CD Player*) • Previous tracks : This CD player is suitable for 12cm disc. 1 Open the front. 2 Slide the disc into the slot with the label facing upwards.
Useful tips Display shows 'CD ERROR' and set beeps. • Check that the discs have been inserted the correct way and that you have not inserted a damaged or dirty disc. Distorted sound during playback. • Player unable to read disc. CD damaged or dirty.
REMOTE CONTROL A wired remote control can be connected to this CASSETTE * set. See your dealer for more information. The • Previous / next track : Select desired track. remote control allows you to carry out some of the main functions of the set, without the need to take your eyes off the road while driving.
DISPLAY OPTIONS Choose what the display shows : In Radio mode : Station name. Frequency (If available and RDS is active). Programme type Clock * (if available) Temperature (if sensor connected and activated) In Cassette * mode : Depending on Clock * Temperature (if current operation.
Need help?
Do you have a question about the CD 2001 and is the answer not in the manual?
Questions and answers