VDO CD 2001 Manual page 15

CASSETTE PLAYER *
PLAYBACK
1 Open the front.
2 Slide the cassette, with the open side to
the right into the cassette opening.
3 Close the front.
The display briefly shows 'TAPE CR' if a metal
or chromium cassette is inserted. Playback
starts.
• If a cassette is already inserted :
Select cassette as SOURCE :
Playback starts.
DOLBY ® B NOISE REDUCTION (NR)
If the tape has been recorded using the DOLBY
B NR System.
• Activate/Deactivate NR :
® Dolby Noise Reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. 'DOLBY' and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
CHANGE SIDE
• Change the side :
• At the end of the cassette, playback
automatically continues with the other side.
FAST REWIND / FAST FORWARD
• Activate/Deactivate FAST REWIND :
* Depending on version
• Activate/Deactivate FAST FORWARD :
– You hear the radio during this operation. If you
continue fast winding until the end of the tape,
playback restarts automatically.
PREVIOUS / NEXT TRACK (Music Search
System)
Select how many tracks you want to miss out
from the current playing position.
• Previous tracks :
• Next tracks :
– The sound is muted until the desired track is
reached. The set can only recognise tracks
when there are silent intervals of at least 3
seconds.
CASSETTE EJECT
Useful tips
Display shows 'TAPE ERR'.
• Check tape for faults
Cassette playback lacks high-notes or loss of
one channel.
• Clean cassette player tape head.
Cassette mechanism changes direction of play
before end of tape.
• Rewind cassette to the end of the tape.
CARE OF CASSETTES
– Only use good quality cassettes of 60 or 90
minutes.
– Put cassettes back in their boxes immediately
after use to protect them from dust and dirt and
to prevent the tape from unwinding.
– Never expose cassettes to heat or direct
sunlight.
– Clean the tape head (once or twice a month)
using a wet-tape cleaning cassette.
15