Subscribe to Our Youtube Channel
Related Manuals for Hyundai power products HYM3313E
Summary of Contents for Hyundai power products HYM3313E
- Page 1 Electric Lawn Mower HYM3313E Instruction Manual WARNING: Read the instructions carefully before use.
-
Page 2: Table Of Contents
Contents Maintenance & Care……………….…25-32 Introduction……..……………………………3 General Maintenance……….………...…25 Replacement Parts/Spares Info..……...26 Safety Information…..…………………..4-13 Exploded Parts Diagrams & Lists…….27-30 Understand Your Machine.…..…………...4 Blade Maintenance……………………..31 Personal Safety...…….……………………4-5 Cleaning…………………………………….31 Inspect Your Machine…………………..5 Troubleshooting…………………….………32 Work Area…….……………………………..6 During Use…….………………………………7 Technical Data…………......33 Vibrations……………………………………..8 Machine Specification……………………33 Noise…………………………………………...8 Residual Risks…………………………………8 Recycling And Disposal..………………...34 Electricity…….………………...……………..9 Double Insulated Devices…..……..10... -
Page 3: Introduction
THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. -
Page 4: Safety Information
Safety Information Understand Your Machine • WARNING! You must read these instructions carefully before operating the machine. Make sure that you are familiar with the controls and properly operate the machine. You must learn how to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire and/or serious injury. -
Page 5: Inspect Your Machine
Safety Information Personal Safety (Continued) • Always keep hands and feet away from all moving parts during operation. Moving parts can cut or crush body parts. • Always keep hands and feet away from all pinch points. • Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service. -
Page 6: Work Area
Safety Information Work Area • Make sure you thoroughly inspect the entire work area and remove all objects and anything that could be thrown by the machine or could damage the machine (branches, stones, wire, toys, etc.). Attempting to clear the work area whilst using the machine will reduce your concentration and creates a trip hazard. -
Page 7: During Use
Safety Information During Use • Always hold the unit with both hands when operating. Keep a firm grip on the handlebars. • Be aware that the machine may unexpectedly bounce upward or jump forward if the machine should strike buried obstacles such as large rocks or roots. Maintain a safe distance as provided by the handle frame. -
Page 8: Vibrations
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 9: Electricity
Safety Information Electricity (Where Applicable) DANGER : ELECTRICITY CAN KILL – NEVER WORK ON LIVE / ENERGISED EQUIPMENT. • Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all electrical supplies. • Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;... -
Page 10: Double-Insulated Appliances
Safety Information Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace. -
Page 11: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. -
Page 12: Symbols On The Machine
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgement. -
Page 13: Intended Use
Safety Information Intended Use The HYM3313E is an electric lawnmower from HYUNDAI. The HYM3313E has a cutting width of 330mm and is powered by a 1300W Motor The HYM3313E is a garden tool and precisely a pedestrian controlled lawnmower. The machine is essentially composed of a motor which drives a blade enclosed in a casing, equipped with wheels and a handle. -
Page 14: Unboxing
2. Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately. 3. You must keep the packaging material in case the machine needs to be returned or repaired. -
Page 15: Features
Features *Not To Scale A. Main Body – The main deck of the machine, this houses the motor and the blade Handle Position Adjustment Indicator – Shows Handle current angle C. Lower Handle D. Bolt Upper Handle Operator Presence Control Lever – A lever put into place for safety, to ensure no accidental operation G. -
Page 16: Assembly
WARNING - Before assembly ensure the machine isn’t plugged into a power source to avoid accidental starting. HYM3313E Assembly – Lower Handles Loosen the wingnut by turning it anti-clockwise. Do not remove the wingnut. Move the lower handle toward the rear of the machine, and then tighten the wingnut by turning it clockwise. -
Page 17: Handle Position Adjustment
Assembly HYM3313E Assembly – Upper Handle Place the Cable Reliever on Upper Handle (E) as shown below. Secure the Upper handles (E) by placing a Bolt (D) through both the lower and upper handles. Secure with a Wing-Nut (H). Your machine should look the same as below. -
Page 18: Grass Collection Box
Assembly HYM3313E Assembly – Grass Collection Box Place the handle into location at the top Grass Collection box (L). Turn over and secure by installing the screws included. Combine the top and bottom halves of the Grass Collection box. There’s clips around the edges of both which need to be clicked into place. -
Page 19: Power Cable
This machine comes equipped with a removable power cable. Simply push the power cable into place as shown below. HYM3313E Assembly – Cable Strain Reliever CAUTION – To safely operate this machine you must use the cable strain reliever. This will prevent the power cable from detaching during operation Simply create a loop in the power cable and pass it through the lower hole of the cable strain reliever. -
Page 20: Cable Clips
Assembly HYM3313E Assembly – Cable Clips Attach the cable onto the right-hand Lower Handle (C) using the Cable Clips (I) provided. This will keep the cable secure and tight to the machine www.hyundaipowerproducts.co.uk... -
Page 21: Operation
Allowing time for this to stop before any other Operation or Maintenance HYM3313E Mower Deck Grass Fins The HYM3313E’s deck features grass fins, which help to channel grass on the edges of lawns, close to fences & walls into the mower blade. The deck is wider than the wheel base;... -
Page 22: Cutting Height Adjustment
Operation HYM3313E Cutting Height Adjustment WARNING – When adjusting the cutting height, ALWAYS ensure the machine is off and the cutting blade is not spinning 1. To adjust the cutting height, turn the machine on it’s side. 2. The Axle is spring loaded into position. You must pull the Axle out of it’s location, and move up or down to select a different position/cutting height. -
Page 23: Grass Indicator
If it is closed, this indicated the Grass Collection Box needs to be emptied Open Closed HYM3313E Grass Collection Box Emptying Empty the grass collector frequently during use. Do not wait until it is completely full. We recommend emptying it when it is half full. -
Page 24: Lawn Care
Lawn Care General Tips • Maintain a constant cutting height. Do not shorten the grass to less than half its original height. • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort, prevent overloading of the motor and leaving clumps of grass clippings. -
Page 25: Maintenance & Care
Maintenance & Care General Maintenance WARNING : Turn OFF the machine, allow all moving parts to come to a complete stop, and disconnect the power cord before maintaining the machine. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 26: Replacement Parts/Spares Info
Replacement Parts/Spares Information No Hassle Returns Same Day Dispatch* Over 10,000 Spare Parts QR Code – Scan the QR code for a direct link to our website Our Website : power-spares.co.uk Call us : 01646 404406 Email us : sales@power-spares.co.uk To maintain your machine in peak operating condition, proper maintenance and care are crucial. -
Page 27: Technical Data
Technical Data Exploded Diagram Image Reference Description Quantity Tapping screw Switch box lower cover Cord clamping plate Connector Rocker switch Waterproof plug Tapping screw Trigger spring Tapping screw Trigger Button spring Safety button Switch box upper cover Upper handrail Knob Lower handrail Left handrail seat Right handrail seat... - Page 28 Technical Data Exploded Diagram Image Reference Description Quantity Motor cover decorative sheet Motor cover Tapping screw Wheel cover Elastic cotter pin Flat washer Wheel Axle spring Front axle Chassis Double-end bolt Rear axle Cord clamping plate Tapping screw Torsional spring Grass box cover Chassis baffle Tapping screw...
- Page 29 Technical Data Exploded Diagram Image Reference Description Quantity Carry handle Tapping screw Upper cover Air handling panel Lower cover www.hyundaipowerproducts.co.uk...
- Page 30 Technical Data Exploded Diagram Image Reference Description Quantity Motor Small belt pulley Tapping screw Flat washer Motor bracket Nylon nut Bearing 609Z Bearing 6002Z Ribbed belt Belt sheave Balde holder Balde Flat washer Flange bolt Dust sponge www.hyundaipowerproducts.co.uk...
-
Page 31: Blade Maintenance
Maintenance & Care Blade Maintenance WARNING - To prevent injury from the blade, have a specialist perform all work such as replacing or sharpening the blade (special tools and skills required). Only use original spare parts: The use of non-original and/or incorrectly fitted parts will jeopardise the safety of the machine, may cause accidents or personal injuries for which the Manufacturer is under no circumstance liable or responsible. -
Page 32: Troubleshooting
Maintenance & Care Troubleshooting Fault Possible Remedy Motor won’t start • Check the fuse in the plug. • Check the cable for damage. • Make sure you are holding in the Stop/Start Safety button while pulling the OPC lever. If the motor is hot, leave to cool down and try again. •... -
Page 33: Technical Data
Technical Data Machine Specification Model HYM3313E Voltage (V) 230-240 Frequency (Hz) 50-60 Rated Power (W) 1300 Cutting Width (cm) No-Load Speed (rpm) 3600 Blade Type Steel Cutting Heights (mm) 20, 40, 60 Grass Collection Box Capacity (L) Wheel Size (Inches) -
Page 34: Recycling And Disposal
Recycling & Disposal Recycling & Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 35: Declaration Of Conformity
Isaac Way, Pembroke Dock, SA72 4RW Country of Origin: China Description: Electric Lawn Mower SKU Code: HYM3313E Date of Issue: 01/12/2023 Regulations and Directives of Compliance • 2006/42/EC The Machinery Directive • 2014/30/EU Annex ll Electromagnetic Compatibility Directive • 2011/65/EU RoHS •... -
Page 36: Useful Information
Go to YouTube and search ‘Hyundai Power Products’. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. Should you find an error, omission or something unclear, please contact us for assistance. -
Page 37: Product Record
Product Record Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. Date Of Purchase:……………………………………………………………………………….. -
Page 38: Notes
Notes www.hyundaipowerproducts.co.uk... -
Page 39: Contact Us
Contact Us Need Help? Talk To Our Experts Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Hyundai Support Website Go to hyundaisupport.co.uk www.hyundaipowerproducts.co.uk... - Page 40 For Inquiries, Please Contact: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UK, SA72 4RW. T: +44 (0) 1646 687 880 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported / Distributed by Genpower Ltd for Licensed by Hyundai Corporation Holdings, Korea the United Kingdom & Ireland...
Need help?
Do you have a question about the HYM3313E and is the answer not in the manual?
Questions and answers