Hyundai power products HYM430SPE Instruction Manual

Hyundai power products HYM430SPE Instruction Manual

Hide thumbs Also See for HYM430SPE:

Advertisement

PETROL LAWNMOWER
HYM430SPE
HYM460SPE
HYM510SPE
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYM430SPE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hyundai power products HYM430SPE

  • Page 1 PETROL LAWNMOWER HYM430SPE HYM460SPE HYM510SPE Instruction Manual...
  • Page 2 We would be delighted if you left us positive feedback! Thank you for purchasing this product. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. Failure to do this may result in personal injury or damage to the product.
  • Page 3: Table Of Contents

    Contents Features......................4 What’s In The Box.....................4 Symbols On The Machine..................5 General Safety....................6-9 For Safe Operation..................10-11 Getting To Know The Machine.................12 Assembly.....................13-20 Cable Attachment....................18 OPC Cable Adjustment..................19 Drive Cable Adjustment..................20 Before Each Use....................21 Starting Procedure..................21-22 After Each Use....................23 Stopping Procedure..................23 Troubleshooting....................24 Specifications....................25 Maintenance And Care................26-34 Checking Oil Level...................28...
  • Page 4: Features

    Features 1 - Drive Control Lever 2 - Handlebar 3 - Choke And Throttle Control* 4 - Fuel Filler Cap 5 - Air Filter 6 - Spark Plug 7 - Exhaust 8 - Side Discharge Chute* 9 - Central Cutting Height Adjuster 10 - Oil Filler / Dipstick 11 - Grass Collector 12 - Recoil Starter Handle...
  • Page 5: Symbols On The Machine

    Symbols On The Machine CAUTION! WARNING Handle carefully. Stop the engine before cleaning of work area. KEEP BYSTANDERS AWAY INSTRUCTION MANUAL Keep bystanders, especially Read and understand operator’s children away! manual before using the machine. Failure to follow instructions could WARNING result in death or serious injury.
  • Page 6: General Safety

    General Safety WARNING : READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE USING THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. Training carried out. The operator or user must take all necessary precautions to ensure their own safety and that of others, especially on slopes DANGER...
  • Page 7 General Safety machine away from the area of spilled fuel and 6. Where applicable, check the battery status avoid creating any source of ignition until the regularly. If there is any damage to the casing, fuel has evaporated and fuel vapours have cover or terminals, you must replace it.
  • Page 8 General Safety General Fuel Safety Electrical Safety (Where Applicable) CAUTION! ALL FUELS ARE FLAMMABLE • Electricity can kill – NEVER work on LIVE/ENERGISED equipment. • Fire hazard - keep fuel away from all sources of ignition for example heaters, • Prior to carrying out any maintenance work lamps, sparks from grinding or welding.
  • Page 9 General Safety You must advise the medical staff of the type • Not all factors that lead to white finger of acid. disease are known, but cold weather, smoking and other diseases that affect blood vessels • Lead/acid battery = dilute sulphuric acid. and blood circulation as well as large and long-lasting impact of shocks are considered •...
  • Page 10: For Safe Operation

    For Safe Operation 2. You must only work in daylight or with good During Use artificial light in good visibility conditions. Keep people, children and animals away from the 1. Never operate the engine in a confined working area. space where dangerous carbon monoxide fumes can develop.
  • Page 11 For Safe Operation 13. You must be careful near ravines, ditches inspect the machine for damage and make or embankments. repairs before using it again. 14. Follow the instructions to start the engine 25. Disengage the blade and turn off the carefully whilst keeping feet away from the engine: blade.
  • Page 12: Getting To Know The Machine

    This machine was designed and manufactured HYM430SPE for cutting and collecting grass in gardens and The HYM430SPE is a petrol powered rear grassy areas, in areas in proportion to its wheel drive, self-propelled, electric push cutting capacity, controlled by a pedestrian button start lawnmower from HYUNDAI, operator.
  • Page 13: Assembly

    Assembly Getting Started Unboxing & Assembly Videos: HYM430SPE Go to youtube.com and type in Hyundai HYM430SPE CAUTION - This guide is meant to serve petrol lawnmower unboxing & assembly. as a quick reference for operating your HYUNDAI lawnmower. We always advise HYM460SPE reading the manual in full before operation.
  • Page 14 Assembly Grass Collection Mowing STEP 4 STEP 1 Attach the base of the handle to the mower and tighten bolts securely. Lift the rear cover. STEP 5 STEP 2 Attach the upper handle to the lower handle and tighten bolts securely. Remove the mulch plug if fitted.
  • Page 15 Assembly STEP 7 STEP 9 HYM460SPE & HYM510SPE ONLY Remove the fuel tank cap. Fill the fuel tank Attach the centre control panel. with fresh straight unleaded petrol. Allow a 25mm gap from the top of the tank, then refit STEP 8 the cap securely.
  • Page 16 Assembly Mulching Mode Side Discharge STEP 1 STEP 1 For mulching mode, lift the rear flap and Lift the rear flap and remove the grass box. remove the grass box. STEP 2 STEP 2 Install the mulching plug. Install the mulching plug. STEP 3 STEP 3 Lower the rear cover.
  • Page 17 Assembly Cut And Drop STEP 4 STEP 1 Lift the side flap. STEP 5 Lift the rear discharge flap and remove the grass collector and mulching plug if installed. STEP 2 Insert the side discharge chute. STEP 6 Insert the two plastic lugs into the mounting points underneath the rear discharge flap (shown below).
  • Page 18: Cable Attachment

    Cable Attachment Cable Attachment NOTE - If you are stood behind the STEP 3 lawnmower: OPC Cable: This attaches to the lever in front of the main handlebar and if followed, will attach to the engine. Drive Cable: This attaches to the lever behind the main handlebar and if followed, will enter the deck of the lawn mower behind the engine.
  • Page 19: Opc Cable Adjustment

    OPC Cable Adjustment STEP 6 STEP 2 Check the cable lies flat and has not snagged Undo the lock nut and wind it forwards. on any other part of the lawnmower. STEP 3 OPC Cable Adjustment NOTE - It is necessary as part of routine maintenance to adjust the OPC cable tension to ensure the lawnmower will start correctly.
  • Page 20: Drive Cable Adjustment

    Drive Cable Adjustment Drive Cable Adjustment NOTE - It is necessary as part of STEP 3 routine maintenance to adjust the drive cable tension to ensure the lawnmower will self-propel correctly. If there is more than 10mm movement in the drive lever before the cable begins to move, then the drive cable will require adjustment.
  • Page 21: Before Each Use

    • Fill the fuel tank with unleaded petrol. Go to page 28 for instructions. HYM430SPE & HYM460SPE ONLY From cold,pump the primer bulb 5 times. • Check the OPC cable, if there is more than 10mm movement in the OPC lever before the cable begins to move, then the OPC cable will require adjustment.
  • Page 22 Pull back the Operator Presence Control Once running, pull the choke lever back one (OPC) lever towards the main handle. notch to run position and the engine will run smoothly. The HYM430SPE & HYM460SPE have a fixed engine speed. STEP 5 STEP 8 For recoil start, pull the starter handle swiftly –...
  • Page 23: After Each Use

    Stopping The Lawnmower After Each Use • Examine the blade for damage. • Clean the machine if necessary, go to page 32 for more information on how to clean your machine. Stopping Procedure CAUTION - The engine and exhaust will remain hot for a while after use. Ensure the engine and exhaust have cooled before carrying out any maintenance or storage.
  • Page 24: Troubleshooting

    Troubleshooting NOTE - Where necessary, all corrective actions should be carried out by suitably qualified persons. If the starter rope becomes disconnected from the rope guide on handle, disconnect the spark plug cap. Pull the starter rope out from engine slowly and re-engage in guide. Re connect spark plug cap. Problem Possible Cause Possible Corrective Action...
  • Page 25: Specifications

    Specifications MODEL HYM430SPE HYM460SPE HYM510SPE Engine Type HYUNDAI IC140VE HYUNDAI IC140VE HYUNDAI IC200VE Engine Size 139cc 139cc 196cc Fuel Tank Capacity Fuel Type Straight Unleaded Straight Unleaded Straight Unleaded Petrol Petrol Petrol Oil Capacity 600ml 600ml 600ml Oil Type SAE 30 OR 15W40...
  • Page 26 Maintenance & Care Safety sharpening. All work on the blade (disassembly, sharpening, balancing, 1. WARNING - Before cleaning or doing re-assembly and/or replacing) should be carried out at a specialised centre as they are maintenance work, you need to disconnect demanding jobs that require special skills and the spark plug cable and read the relevant special tools.
  • Page 27: Maintenance And Care

    HYM430SPE instructions, making sure that the machine is Go to youtube.com and type in How to Service the stable before performing any interventions. On Hyundai HYM430SPE Petrol Lawn Mower. side discharge models, remove the discharge HYM460SPE chute (if installed). Go to youtube.com and type in How to Service the Hyundai HYM460SPE Petrol Lawn Mower.
  • Page 28: Checking Oil Level

    Maintenance & Care Checking Oil Level Filling The Fuel Tank CAUTION - ALL FUELS ARE FLAMMABLE 1. Remove the oil filler cap and wipe the dipstick clean. ALWAYS fuel and defuel in a well ventilated area 2. Refit the dipstick without screwing it down. outside of buildings.
  • Page 29 Maintenance And Care The Spark Plug STEP 1 STEP 6 You MUST allow the engine to cool down The spark plug gap should be 0.70mm to before carrying out any maintenance. 0.80mm. Check the gap by using a feeler gauge. Adjust as necessary by carefully bending the side electrode to achieve the STEP 2 correct gap.
  • Page 30 Maintenance & Care Air Filter STEP 3 Clean the filter by blowing air through it using CAUTION - A dirty air filter will restrict the an air gun not exceeding 30psi. air flow to the carburetor, which will reduce engine efficiency. STEP 4 When using the lawnmower in very dusty areas you must clean or replace the air filter...
  • Page 31 Maintenance & Care Fuel And Carburetor Blade Maintenance CAUTION - ALL FUELS ARE FLAMMABLE Check the blade, in order to obtain a good cut, the blade should always be sharp and ALWAYS fuel and defuel in a well ventilated well balanced. At regular intervals, check the area outside of buildings.
  • Page 32 Maintenance & Care Cleaning Storage CAUTION - DO NOT use a hose pipe or CAUTION - When storing the machine, pressure washer to clean the engine. Water make sure it has been cleaned as in the can damage the engine or contaminate the previous section.
  • Page 33 Maintenance & Care Environmental Protection 8. Remove the spark plug and pour 1 teaspoon of fresh engine oil down the cylinder bore. Cover the spark plug hole with a lint free 1. Environmental protection should be a clean cloth, ensuring no dirt or debris falls into priority of considerable importance when the cylinder chamber and gently pull the recoil using the machine, for the benefit of both...
  • Page 34: Disposal

    Maintenance & Care Recycling And Disposal We are a Member of the VALPAK National Compliance Scheme and our registration number is RM08660 We do not offer a takeback scheme for the recovery of For further information about disposal please Waste Electrical Electronic contact your Local Authority.
  • Page 35: Spare Parts

    Only use original spare parts: The use of non-original and/or incorrectly fitted parts will jeopardize the safety of the machine, may cause accidents or personal injuries for which the Manufacturer is under no circumstance liable or responsible. HYM430SPE Part HYM430SPE Part Number Blade PAC001476 OPC Cable...
  • Page 36: Tips For Mowing

    Tips For Mowing General Tips What Time Should I Mow? Early Morning (6am-8am) • Maintain a constant cutting height of 3-5cm. Grass could be wet and your Do not shorten the grass to less than half its lawnmower could leave tracks. original height.
  • Page 37: Our Product Range

    Our Product Range Generators Mini Dumpers Leisure Inverter, Petrol, Diesel And Built-In 4-Wheel Drive Mini Dumper / Power Barrow Motorhome Generators Yard Sweeper Pressure Washers Self Propelled Yard Sweeper Power Brush Petrol, Diesel And Electric Pressure Washers Water Pumps Scarifiers Submersible, Clean And Dirty Water And Petrol Lawn Scarifier And Aerator Professional Chemical Water Pumps...
  • Page 38: Useful Information

    To leave a review, please go to: www.hyundaipowerequipment.co.uk/warranty uk.trustpilot.com/review/hyundaipowerequipment.co.uk Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS Ordering Spare Parts website: www.hyundaipowerproducts.co.uk Only use original spare parts: The use of non-original and/or incorrectly fitted...
  • Page 39: Notes

    Notes...
  • Page 40 Notes...
  • Page 41 Notes...
  • Page 42: Contact Us

    Need Help? Talk To Our Experts Contact Us Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687880, open Monday-Friday 8.30am-5pm. Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Live chat is open Monday-Friday from 8.30am-5pm. Post Genpower Limited, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK.
  • Page 43: Declaration Of Conformity

    Declaration Of Conformity EC Declaration of Conformity We hereby declare that the machine detailed in this declaration complies to all the relevant provisions of the following EC directives. • 2006/42/EC The Machinery Directive • 2014/30/EU Annex ll Electromagnetic Compatibility Directive •...
  • Page 44 Importer: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 E: info@hyundaipowerequipment.co.uk www.hyundaipowerproducts.co.uk Imported/Distributed by Genpower Ltd for The United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...

This manual is also suitable for:

Hym460speHym510spe

Table of Contents