Dell Inspiron DCSLF Setup Manual page 41

c. If you are experiencing memory issues
press <y>, otherwise press <n>. The
following message is displayed:
"Booting Dell Diagnostic
Utility Partition. Press any
key to continue."
d. Press any key to go to the
Option window.
If PSA is not invoked:
Press any key to start the Dell Diagnostics from
the diagnostics utility partition on your hard
drive and go to the Choose An Option window.
4. Select the test you want to run.
5. If you encounter a problem during a test,
a message with the error code and a
description of the problem will appear on
your screen. Write down the error code and
problem description and contact Dell (see
"Contacting Dell" on page 55).
6.
Choose An
7.
Starting Dell Diagnostics From the
Drivers and Utilities Disc
1.
2.
NOTE: The Service Tag for your computer
is displayed at the top of each test screen.
The Service Tag helps you identify your
computer when you contact Dell.
When the tests complete, close the test
screen to return to the Choose An Option
window.
To exit the Dell Diagnostics and restart the
computer, click Exit.
Drivers and Utilities disc.
Insert the
Shut down and restart the computer.
When the DELL logo appears, press <F12>
immediately.
NOTE: If you wait too long and the
operating system logo appears, continue to
wait until you see the Microsoft
desktop; then, shut down your computer
and try again.
Using Support Tools
Windows
® ®
39