Dell Inspiron 8600 Owner's Manual page 121

If a Mini PCI card is not already installed, go to step 10. If you are replacing a Mini
9
PCI card, remove the existing card:
Disconnect the Mini PCI card from any attached cables.
a
Release the Mini PCI card by spreading the metal securing tabs until the card
b
pops up slightly.
Lift the Mini PCI card out of its connector.
c
Mini PCI card Mini PCI card
connector
NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or under the card.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini
10
PCI card into the connector until you feel a click.
antenna
cables (2)
Adding and Re placing Parts
121