Power Cord Connection; Lithium Battery; System Unit Cover - Tritec UltraStation 1E+ Installation And User Manual

Power Cord Connection
Lithium Battery
System Unit Cover
vi
The UltraStation lE+ is designed to work with single-phase power systems
having a grounded neutral conductor. Do not plug your UltraStation lE+ into
any other type of power system or electrical shock may result. If you are unsure
of the type of power supplied to your building, contact a qualified electrician or
your facilities manager.
All power cords do not have the same current ratings. Household extension cords
are not meant to be used with your UltraStation lE+ equipment because they do
not have sufficient current ratings. Therefore, do not use household extension
cords.
UltraStation lE+ is shipped with grounding-type power cords. Always plug the
cord into the grounded power outlet to reduce the risk of electric shock.
The lithium battery found on the main logic board is not customer replaceable.
Do not disassemble or attempt to recharge it.
In
order to add memory, boards, cards or internal storage devices, you must
remove the system unit cover. Be sure to replace the cover before powering on
your system unit.
It is not safe to operate the UltraStation lE+ without the system unit cover in
place. Failure to comply with this precaution can result in personal injury and
system damage.
Safety Agency Compliance