Page 1
Built-in gas hob PRA3A.I1. Information for Use [en]...
Page 2
PRA3A.I9.. Component Pan support Control knob Dual-wok multi-crown burner 5.80 / 6.10 kW The images shown in these instructions are for guid- ance only.
Safety en Further information and explanations are available online: Table of contents ¡ Under supervision. Never leave the appli- ance unattended when cooking for short Safety .............. 3 periods. ¡ In a private household and in a domestic Preventing material damage ...... 6 environment.
en Safety ▶ Call the after sales service or the gas sup- Hob covers can cause accidents, for example plier. due to overheating, catching fire or materials Escaping gas may cause an explosion. Small shattering. amounts of gas can collect over a longer ▶...
Page 5
Safety en ▶ Shut off the gas supply. WARNING ‒ Risk of electric shock! ▶ Do not touch the surface of the appliance Improper repairs are dangerous. ▶ Do not use the appliance. ▶ Repairs to the appliance should only be ▶ Call the customer service. carried out by trained specialist staff.
en Preventing material damage Preventing material damage 2 Preventing material damage Handling the cookware roughly may damage the sur- ATTENTION! face of the appliance. Heat can cause damage to adjacent appliances or kit- Handle the cookware on the hob carefully. ▶ chen units.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance Note: Never remove the control knob base and its 4.1 Control knob holder . Only Customer Service can reinsert the con- You can use the control knobs to set the flame height trol knob base and its holder.
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 12...
Cookware en 6.3 Igniting a gas burner manually 6.5 Normal behaviour during operation In the event of a power cut, you can light the burners This behaviour is normal for the appliance: manually. ¡ Slight hissing noise from the ignited burner. ¡ Release of odours when using the appliance for the Press the control knob for the selected burner and first time.
Do not use a knife or sharp objects to clean the ▶ You can obtain suitable cleaning products from after- connection between the glass and the burner pan- sales service or the online shop www.bosch- els, the metal frames or the glass/aluminium plates home.com. for cleaning.
Troubleshooting en Part Recommended cleaning method Notes Control elements Clean using a damp sponge ¡ The control elements can be removed for easier cloth and hot soapy water. cleaning. Never remove the plinth for the control ele- ments or its holder. → "Removable control knob", Page 7 ¡...
en Customer Service Fault Cause and troubleshooting Automatic ignition is Food remnants or dirt are located between the ignition plug and the burner. not working. Clean the space between the ignition plugs and burners. ▶ Burner parts are wet. Carefully dry the burner parts. ▶...
Disposal en The rating plate can be found: Make a note of your appliance's details and the Cus- ¡ on the appliance certificate. tomer Service telephone number to find them again quickly. ¡ on the lower section of the hob. Disposal 12 ...
Page 16
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the PRA3A I1 Series and is the answer not in the manual?
Questions and answers