Advertisement
Quick Links
SUPER-X METAL SERIES
STUBBLE TRIMMER
S992U
SAFETY CAUTIONS
• This appliance should only be used as described within this
instruction book. Please retain for reference.
IMPORTANT CHILD SAFETY
• ALWAYS keep out of the reach of children (during and after
use).
• This appliance should not be used, cleaned or maintained
by children.
• Always take extra care if used on children or near children.
• Do not use on very young children.
IMPORTANT SAFETY
• This appliance can be used in the bath or shower.
• UK Only: Do not charge this appliance in the bathroom.
• Outside the UK: If using the appliance in a bathroom, unplug
after use as the proximity of water can be dangerous even
if the appliance is switched off. For additional protection the
installation of a residual current device (RCD) with a rated
residual operating current not exceeding 30mA is advisable
in the electrical circuit supplying the bathroom. Ask your
installer for advice.
CAUTION: Keep the power cord and the appliance dry.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BaByliss S992U
Summary of Contents for BaByliss S992U
- Page 1 SUPER-X METAL SERIES STUBBLE TRIMMER S992U SAFETY CAUTIONS • This appliance should only be used as described within this instruction book. Please retain for reference. IMPORTANT CHILD SAFETY • ALWAYS keep out of the reach of children (during and after use).
- Page 2 • Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged or if the appliance has been dropped. In the event of damage contact the Conair Customer Care Line (refer to ‘UK After Sales Service’ section for further information).
- Page 3 • This appliance should not be used by adults whose reduced physical, sensory or mental capabilities, or whose lack of experience and knowledge, might cause a hazard, unless they have been correctly instructed to understand the safe use and hazards involved and are adequately supervised. •...
- Page 4 • When using the oil for the first time, unscrew the cap and cut off the very end of the plastic tube with a pair of scissors. • Remove the comb guide and switch the appliance on. • Holding the trimmer at a 45 degree angle, gently squeeze the oil tube and apply 2 drops directly onto the blades.
- Page 5 Using the comb guide • The comb guide allows you to change the cutting length of your trimmer. You’ll need to experiment to find your preferred length, but as a guide, 0.4mm will give you very short stubble, whilst 1.6mm will give you a longer stubble look.
-
Page 6: Cleaning And Maintenance
IMPORTANT: Please note when using the trimmer without the comb guide, the cutting length will be below 0.4mm. The length setting shown on the LED screen will no longer be relevant when the comb guide is detached. Waterproof The trimmer and comb guides are 100% waterproof and can be used in the shower and bath. -
Page 7: Battery Disposal
Customer Care Line (refer to ‘UK After Sales Service’ section). UK GUARANTEE This BaByliss appliance is guaranteed for consumer use for 3 years and is only valid within the United Kingdom. This guarantee covers consumer use only i.e. defects occurring under normal use within the home from date of purchase or date of delivery, whichever is later. - Page 8 3.) The appliance is used for professional / non domestic usage 4.) Repairs or alterations have been attempted by unauthorised persons 5.) The failure of the appliance is a direct result of misuse 6.) The failure is a result of not following the instructions for use This guarantee does not cover any cosmetic damage due to misuse of the product nor any damage to persons or property that occurs because of product misuse.
-
Page 9: Uk After Sales Service
UK AFTER SALES SERVICE For further advice on using the appliance, contact the Conair Customer Care Line on 03705 133191 (09:00 to 17:00 Monday to Friday) or email your enquiry to ukinfo@conair.com. If you should need to return your appliance to us please send it to the following address: Customer Care Centre Conair Logistics... - Page 12 IB-24/157A...
Need help?
Do you have a question about the S992U and is the answer not in the manual?
Questions and answers