Related Manuals for Acre comnet CWG26F4T22M
Summary of Contents for Acre comnet CWG26F4T22M
- Page 1 HARDWARE INSTALLATION AND OPERATION MANUAL CWG26F4T22M 22-Port 10/100/1000M + 2 Gigabit SFP Ports + 2 RJ45/SFP Combo Ports Managed Switch CWG26F4T22M Hardware Manual | 1...
-
Page 2: Packet Contents
Hardware – Hardware Description 1.1. Packet Contents Before you start to install this Ethernet Switch, please verify your package and check if the following items are present: 1 × Ethernet Switch • 1 × AC Power Cord • Optional Accessory: 11” to 19” Rack-mount Kit for Rack Installation (Contact Sales) •... -
Page 3: Hardware Description
Hardware – Hardware Installation 1.2. Hardware Description This section mainly describes the hardware of Full-Management switch and gives a physical and functional overview of the switch. Front Panel The front panel of the Full-Management switch consists of 22 10M/100M/1G RJ45 ports and 2 RJ45/SFP Combo Ports. - Page 4 Hardware – Hardware Installation Brackets & Rack-mounting Installation The switch comes with 2 L shaped brackets & 8 screws, allowing you to fasten your switch to a 19-inch rack. The following sections will guide you to install L shape brackets on the switch and install the switch to a 19-inch rack.
- Page 5 Hardware – Hardware Installation Ethernet Cable Request The wiring cable types are as below: 10 Base-T: 2-pair UTP/STP CAT. 3, 4, 5 cable, EIA/TIA-568 100-ohm (Max. 100m) 100 Base-TX: 2-pair UTP/STP CAT. 5 cable, EIA/TIA-568 100-ohm (Max. 100m) 1000 Base-T: 4-pair UTP/STP CAT.
- Page 6 Hardware – Hardware Installation Uninstalling SFP Transceiver and Optical Cable Please follow the steps down below to uninstall SFP transceiver and optical cable on the switch. 1. Press and hold the latch on the optical fiber, and pull the optical fiber out of the SFP transceiver, as shown in the figure down below.
Need help?
Do you have a question about the comnet CWG26F4T22M and is the answer not in the manual?
Questions and answers