Audio Technica ATND971a Instructions

INSTRUCTIONS
Network Microphone
ATND971a
Thank you for purchasing the ATND971a. Before using the microphone,
please read the manual carefully. Keep the manual handy for reference.
● Connects directly to network via Ethernet cable—no solder-
ing or additional cable required
● Integrated user switch controls talk/mute in Local mode and
triggers Dante-enabled devices in Remote mode
● Local or remote control of gain, low-cut UniSteep® filter and
red/green LED status indicator
● Powered by network PoE
● Scalable across Dante's 512 bidirectional audio channels
● Touch-sensitive capacitive-type user switch
● UniGuard® RFI-shielding technology offers outstanding
rejection of radio frequency interference (RFI)
● UniSteep® filter provides a steep low-frequency attenuation
to improve sound pickup without affecting voice quality
● Heavy die-cast case and non-slip silicone foam bottom pads
minimize coupling of surface vibration to the microphone
● Support for Dante Domain Manager and Dante AES67 mode
Usage Instructions
● Please note that this product works only with other Dante
enabled devices. The ATND971a is not a stand-alone
device.
● Please also read the manuals of the devices to which the
ATND971a will be connected to.
● Before connecting the ATND971a, please mute the audio
level of all devices.
● When connecting the ATND971a:
● Connect to an Ethernet port with PoE power
supply.
● Use CAT5e cables and above.
- STP cables are recommended.
- It is recommended to not use cables with a
length of over 100 meters.
- Do not connect to a LAN distributor.
● The ATND971a cannot be directly connected to the
internet.
＊All written company names and product names are trademarks or
registered trademarks of the respective companies.