INFINIX HOT 40Pro Manual

Know your phone

1. Press and hold the power button until the display lights up to turn on the device.
2. To turn off the device, press and hold the power button, tap "Power Off", and tap "Power Off" again on the next screen.
3. To restart the device, press and hold the power button, tap "Restart", and tap "Restart" again on the next screen.

1. Front camera
2. Volume + key
3. Volume - key
4. Power key & side fingerprint sensor
5. NFC

SIM/SD card installation

1. Power off mobile.
2. To pop open the SIM tray, insert the provided SIM-eject tool into the hole beside the tray.
3. Insert the SIM card into the SIM card slot.
4. Insert the SIM card slot and find it in place.
5. Refer to the following picture for SIM/SD card installation.

Safety Information

To ensure safe and accurate operation and how to dispose of the device properly, please read all the safety information carefully before using your device.

Operation, Safety, Usage Errors and Maintenance Repair Rules

High sound pressure with hearing damage risk.
Do not listen at high volume levels for long periods.

1. Use headphones with care, as excessive sound pressure on ears may cause hearing loss.
2. An unrecognized or incompatible power adapter, charger, or battery may damage your device, shorten its life, or cause fire, explosion, or other hazards.
3. Adapter1: U330XEA
   Input: 100-240V~50/60Hz 1.5A
   Output: 5.0V ⎓ 2.0A 10.0W or 10.0V ⎓ 3.3A 33.0W MAX
   Adapter2: U330XKA
   Input: 100-240V~50/60Hz 1.5A
   Output: 5.0V ⎓ 2.0A 10.0W or 10.0V ⎓ 3.3A 33.0W MAX
   Adapter3: U330XEB
   Input: 100-240V~50/60Hz 1.5A
   Output: 5.0V ⎓ 3.0A 15.0W or 5.0-10.0V ⎓ 3.3A or 11.0V ⎓ 3.0A 33.0W MAX
   Adapter4: U330XKB
   Input: 100-240V~50/60Hz 1.5A
   Output: 5.0V ⎓ 3.0A 15.0W or 5.0-10.0V ⎓ 3.3A or 11.0V ⎓ 3.0A 33.0W MAX
4. EUT Temperature: -10°C~+55°C (Standalone). 5°C~+40°C (with adapter).
5. Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
6. The back cover can't be removed.
7. Do not replace, disassemble, modify, mechanically crush or cut the battery, as it may cause battery leakage, overheating, explosion or fire.
8. Observe local laws and regulations when using the device. To reduce the risk of an accident, do not use your wireless device while driving.
9. Only use the device according to the instructions supplied with the device immediately before flying or in boarding. The use of wireless devices in an aircraft may cause interference in wireless networks, may be dangerous to the operation of the aircraft or may be illegal.
10. To avoid damage to parts or internal circuits of your device, do not use the device in dusty, smoky, damp, or dirty environments, or near magnetic fields.
11. When charging the device, make sure that the power adapter is plugged into a plug close to the devices and is easily accessible.
12. Unplug the charger from the electrical outlet and the device when not in use.
13. Do not use, store, or transport the device in locations where flammable materials or explosives are stored (such as a gas station, oil reservoir, or chemical plant). Using your device in these environments increases the risk of explosion or fire.
14. Dispose of this device, battery, and accessories in accordance with local regulations. Should not be disposed of with normal household waste. Improper use of the battery may result in fire, explosion or other hazards.
15. You can clean your device with a dry, soft cloth.